Hi Thomas,
On Mon, Feb 11, 2019 at 02:10:40PM +0000, Thomas Hämmerle wrote:
> From: Thomas Haemmerle <[email protected]>
>
> Port Xilinx Zynq MPSoC Firmware layer driver from linux.
>
> Signed-off-by: Thomas Haemmerle <[email protected]>
> ---
> arch/arm/Kconfig | 1 +
> arch/arm/mach-zynqmp/Makefile | 2 +-
> arch/arm/mach-zynqmp/firmware-zynqmp.c | 601
> +++++++++++++++++++++
> .../arm/mach-zynqmp/include/mach/firmware-zynqmp.h | 66 +++
> 4 files changed, 669 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/mach-zynqmp/firmware-zynqmp.c
> create mode 100644 arch/arm/mach-zynqmp/include/mach/firmware-zynqmp.h
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index c1f385b..fdbe5b7 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -250,6 +250,7 @@ config ARCH_ZYNQMP
> select CPU_V8
> select HAS_DEBUG_LL
> select HAVE_PBL_MULTI_IMAGES
> + select ARM_SMCCC
> select COMMON_CLK
> select COMMON_CLK_OF_PROVIDER
> select CLKDEV_LOOKUP
> diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
> index c601374..021efc9 100644
> --- a/arch/arm/mach-zynqmp/Makefile
> +++ b/arch/arm/mach-zynqmp/Makefile
> @@ -1,2 +1,2 @@
> # SPDX-License-Identifier: GPL-2.0-or-later
> -obj- := __dummy__.o
> +obj-y += firmware-zynqmp.o
> diff --git a/arch/arm/mach-zynqmp/firmware-zynqmp.c
> b/arch/arm/mach-zynqmp/firmware-zynqmp.c
Maybe drivers/firmware/ would be a more appropriate directory to put
this driver in.
> +static int zynqmp_firmware_probe(struct device_d *dev)
> +{
> + int ret;
> +
> + ret = get_set_conduit_method(dev->device_node);
> + if (ret)
> + goto out;
> +
> + zynqmp_pm_get_api_version(&pm_api_version);
> + if (pm_api_version < ZYNQMP_PM_VERSION) {
> + dev_err(dev, "Platform Management API version error."
> + "Expected: v%d.%d - Found: v%d.%d\n",
> + ZYNQMP_PM_VERSION_MAJOR,
> + ZYNQMP_PM_VERSION_MINOR,
> + pm_api_version >> 16, pm_api_version & 0xFFFF);
> + ret = -1;
> + goto out;
-1 is -EPERM which is not a meaningful error code here. Please pick
something appropriate from errno.h.
Otherwise looks good. This looks like clock support. Are you planning to
create a clk driver aswell?
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
