As the sama5d3 based microchip-ksz9477-evb board still uses the old
bindings, the dt-compat.c code is ported as well. This can be removed
when all in-kernel at91 boards have been ported to the new bindings.

Signed-off-by: Ahmad Fatoum <a.fat...@pengutronix.de>
---
 drivers/clk/at91/Makefile    |   2 +-
 drivers/clk/at91/dt-compat.c | 961 +++++++++++++++++++++++++++++++++++
 2 files changed, 962 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/at91/dt-compat.c

diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index ec41c15fa5f4..f8935129101c 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -2,7 +2,7 @@
 # Makefile for at91 specific clk
 #
 
-obj-y += pmc.o sckc.o
+obj-y += pmc.o sckc.o dt-compat.o
 obj-y += clk-slow.o clk-main.o clk-pll.o clk-plldiv.o clk-master.o
 obj-y += clk-system.o clk-peripheral.o clk-programmable.o
 
diff --git a/drivers/clk/at91/dt-compat.c b/drivers/clk/at91/dt-compat.c
new file mode 100644
index 000000000000..bbd670641bba
--- /dev/null
+++ b/drivers/clk/at91/dt-compat.c
@@ -0,0 +1,961 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <of.h>
+#include <driver.h>
+#include <regmap.h>
+#include <mfd/syscon.h>
+
+
+#include "pmc.h"
+
+#define MASTER_SOURCE_MAX      4
+
+#define PERIPHERAL_AT91RM9200  0
+#define PERIPHERAL_AT91SAM9X5  1
+
+#define PERIPHERAL_MAX         64
+
+#define PERIPHERAL_ID_MIN      2
+
+#define PROG_SOURCE_MAX                5
+#define PROG_ID_MAX            7
+
+#define SYSTEM_MAX_ID          31
+
+#ifdef CONFIG_HAVE_AT91_AUDIO_PLL
+static void __init of_sama5d2_clk_audio_pll_frac_setup(struct device_node *np)
+{
+       struct clk *hw;
+       const char *name = np->name;
+       const char *parent_name;
+       struct regmap *regmap;
+
+       regmap = syscon_node_to_regmap(of_get_parent(np));
+       if (IS_ERR(regmap))
+               return;
+
+       parent_name = of_clk_get_parent_name(np, 0);
+
+       hw = at91_clk_register_audio_pll_frac(regmap, name, parent_name);
+       if (IS_ERR(hw))
+               return;
+
+       of_clk_add_provider(np, of_clk_src_simple_get, hw);
+}
+CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_frac_setup,
+              "atmel,sama5d2-clk-audio-pll-frac",
+              of_sama5d2_clk_audio_pll_frac_setup);
+
+static void __init of_sama5d2_clk_audio_pll_pad_setup(struct device_node *np)
+{
+       struct clk *hw;
+       const char *name = np->name;
+       const char *parent_name;
+       struct regmap *regmap;
+
+       regmap = syscon_node_to_regmap(of_get_parent(np));
+       if (IS_ERR(regmap))
+               return;
+
+       parent_name = of_clk_get_parent_name(np, 0);
+
+       hw = at91_clk_register_audio_pll_pad(regmap, name, parent_name);
+       if (IS_ERR(hw))
+               return;
+
+       of_clk_add_provider(np, of_clk_src_simple_get, hw);
+}
+CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_pad_setup,
+              "atmel,sama5d2-clk-audio-pll-pad",
+              of_sama5d2_clk_audio_pll_pad_setup);
+
+static void __init of_sama5d2_clk_audio_pll_pmc_setup(struct device_node *np)
+{
+       struct clk *hw;
+       const char *name = np->name;
+       const char *parent_name;
+       struct regmap *regmap;
+
+       regmap = syscon_node_to_regmap(of_get_parent(np));
+       if (IS_ERR(regmap))
+               return;
+
+       parent_name = of_clk_get_parent_name(np, 0);
+
+       hw = at91_clk_register_audio_pll_pmc(regmap, name, parent_name);
+       if (IS_ERR(hw))
+               return;
+
+       of_clk_add_provider(np, of_clk_src_simple_get, hw);
+}
+CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_pmc_setup,
+              "atmel,sama5d2-clk-audio-pll-pmc",
+              of_sama5d2_clk_audio_pll_pmc_setup);
+#endif /* CONFIG_HAVE_AT91_AUDIO_PLL */
+
+#ifdef CONFIG_HAVE_AT91_GENERATED_CLK
+#define GENERATED_SOURCE_MAX   6
+
+#define GCK_ID_I2S0            54
+#define GCK_ID_I2S1            55
+#define GCK_ID_CLASSD          59
+
+static void __init of_sama5d2_clk_generated_setup(struct device_node *np)
+{
+       int num;
+       u32 id;
+       const char *name;
+       struct clk *hw;
+       unsigned int num_parents;
+       const char *parent_names[GENERATED_SOURCE_MAX];
+       struct device_node *gcknp;
+       struct clk_range range = CLK_RANGE(0, 0);
+       struct regmap *regmap;
+
+       num_parents = of_clk_get_parent_count(np);
+       if (num_parents == 0 || num_parents > GENERATED_SOURCE_MAX)
+               return;
+
+       of_clk_parent_fill(np, parent_names, num_parents);
+
+       num = of_get_child_count(np);
+       if (!num || num > PERIPHERAL_MAX)
+               return;
+
+       regmap = syscon_node_to_regmap(of_get_parent(np));
+       if (IS_ERR(regmap))
+               return;
+
+       for_each_child_of_node(np, gcknp) {
+               bool pll_audio = false;
+
+               if (of_property_read_u32(gcknp, "reg", &id))
+                       continue;
+
+               if (id < PERIPHERAL_ID_MIN || id >= PERIPHERAL_MAX)
+                       continue;
+
+               if (of_property_read_string(np, "clock-output-names", &name))
+                       name = gcknp->name;
+
+               of_at91_get_clk_range(gcknp, "atmel,clk-output-range",
+                                     &range);
+
+               if (of_device_is_compatible(np, "atmel,sama5d2-clk-generated") 
&&
+                   (id == GCK_ID_I2S0 || id == GCK_ID_I2S1 ||
+                    id == GCK_ID_CLASSD))
+                       pll_audio = true;
+
+               hw = at91_clk_register_generated(regmap, name,
+                                                parent_names, num_parents,
+                                                id, pll_audio, &range);
+               if (IS_ERR(hw))
+                       continue;
+
+               of_clk_add_provider(gcknp, of_clk_src_simple_get, hw);
+       }
+}
+CLK_OF_DECLARE(of_sama5d2_clk_generated_setup, "atmel,sama5d2-clk-generated",
+              of_sama5d2_clk_generated_setup);
+#endif /* CONFIG_HAVE_AT91_GENERATED_CLK */
+
+#ifdef CONFIG_HAVE_AT91_H32MX
+static void __init of_sama5d4_clk_h32mx_setup(struct device_node *np)
+{
+       struct clk *hw;
+       const char *name = np->name;
+       const char *parent_name;
+       struct regmap *regmap;
+
+       regmap = syscon_node_to_regmap(of_get_parent(np));
+       if (IS_ERR(regmap))
+               return;
+
+       parent_name = of_clk_get_parent_name(np, 0);
+
+       hw = at91_clk_register_h32mx(regmap, name, parent_name);
+       if (IS_ERR(hw))
+               return;
+
+       of_clk_add_provider(np, of_clk_src_simple_get, hw);
+}
+CLK_OF_DECLARE(of_sama5d4_clk_h32mx_setup, "atmel,sama5d4-clk-h32mx",
+              of_sama5d4_clk_h32mx_setup);
+#endif /* CONFIG_HAVE_AT91_H32MX */
+
+#ifdef CONFIG_HAVE_AT91_I2S_MUX_CLK
+#define        I2S_BUS_NR      2
+
+static void __init of_sama5d2_clk_i2s_mux_setup(struct device_node *np)
+{
+       struct regmap *regmap_sfr;
+       u8 bus_id;
+       const char *parent_names[2];
+       struct device_node *i2s_mux_np;
+       struct clk *hw;
+       int ret;
+
+       regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
+       if (IS_ERR(regmap_sfr))
+               return;
+
+       for_each_child_of_node(np, i2s_mux_np) {
+               if (of_property_read_u8(i2s_mux_np, "reg", &bus_id))
+                       continue;
+
+               if (bus_id > I2S_BUS_NR)
+                       continue;
+
+               ret = of_clk_parent_fill(i2s_mux_np, parent_names, 2);
+               if (ret != 2)
+                       continue;
+
+               hw = at91_clk_i2s_mux_register(regmap_sfr, i2s_mux_np->name,
+                                              parent_names, 2, bus_id);
+               if (IS_ERR(hw))
+                       continue;
+
+               of_clk_add_provider(i2s_mux_np, of_clk_src_simple_get, hw);
+       }
+}
+CLK_OF_DECLARE(sama5d2_clk_i2s_mux, "atmel,sama5d2-clk-i2s-mux",
+              of_sama5d2_clk_i2s_mux_setup);
+#endif /* CONFIG_HAVE_AT91_I2S_MUX_CLK */
+
+static void __init of_at91rm9200_clk_main_osc_setup(struct device_node *np)
+{
+       struct clk *hw;
+       const char *name = np->name;
+       const char *parent_name;
+       struct regmap *regmap;
+       bool bypass;
+
+       of_property_read_string(np, "clock-output-names", &name);
+       bypass = of_property_read_bool(np, "atmel,osc-bypass");
+       parent_name = of_clk_get_parent_name(np, 0);
+
+       regmap = syscon_node_to_regmap(of_get_parent(np));
+       if (IS_ERR(regmap))
+               return;
+
+       hw = at91_clk_register_main_osc(regmap, name, parent_name, bypass);
+       if (IS_ERR(hw))
+               return;
+
+       of_clk_add_provider(np, of_clk_src_simple_get, hw);
+}
+CLK_OF_DECLARE(at91rm9200_clk_main_osc, "atmel,at91rm9200-clk-main-osc",
+              of_at91rm9200_clk_main_osc_setup);
+
+static void __init of_at91sam9x5_clk_main_rc_osc_setup(struct device_node *np)
+{
+       struct clk *hw;
+       u32 frequency = 0;
+       u32 accuracy = 0;
+       const char *name = np->name;
+       struct regmap *regmap;
+
+       of_property_read_string(np, "clock-output-names", &name);
+       of_property_read_u32(np, "clock-frequency", &frequency);
+       of_property_read_u32(np, "clock-accuracy", &accuracy);
+
+       regmap = syscon_node_to_regmap(of_get_parent(np));
+       if (IS_ERR(regmap))
+               return;
+
+       hw = at91_clk_register_main_rc_osc(regmap, name, frequency, accuracy);
+       if (IS_ERR(hw))
+               return;
+
+       of_clk_add_provider(np, of_clk_src_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_main_rc_osc, "atmel,at91sam9x5-clk-main-rc-osc",
+              of_at91sam9x5_clk_main_rc_osc_setup);
+
+static void __init of_at91rm9200_clk_main_setup(struct device_node *np)
+{
+       struct clk *hw;
+       const char *parent_name;
+       const char *name = np->name;
+       struct regmap *regmap;
+
+       parent_name = of_clk_get_parent_name(np, 0);
+       of_property_read_string(np, "clock-output-names", &name);
+
+       regmap = syscon_node_to_regmap(of_get_parent(np));
+       if (IS_ERR(regmap))
+               return;
+
+       hw = at91_clk_register_rm9200_main(regmap, name, parent_name);
+       if (IS_ERR(hw))
+               return;
+
+       of_clk_add_provider(np, of_clk_src_simple_get, hw);
+}
+CLK_OF_DECLARE(at91rm9200_clk_main, "atmel,at91rm9200-clk-main",
+              of_at91rm9200_clk_main_setup);
+
+static void __init of_at91sam9x5_clk_main_setup(struct device_node *np)
+{
+       struct clk *hw;
+       const char *parent_names[2];
+       unsigned int num_parents;
+       const char *name = np->name;
+       struct regmap *regmap;
+
+       num_parents = of_clk_get_parent_count(np);
+       if (num_parents == 0 || num_parents > 2)
+               return;
+
+       of_clk_parent_fill(np, parent_names, num_parents);
+       regmap = syscon_node_to_regmap(of_get_parent(np));
+       if (IS_ERR(regmap))
+               return;
+
+       of_property_read_string(np, "clock-output-names", &name);
+
+       hw = at91_clk_register_sam9x5_main(regmap, name, parent_names,
+                                          num_parents);
+       if (IS_ERR(hw))
+               return;
+
+       of_clk_add_provider(np, of_clk_src_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_main, "atmel,at91sam9x5-clk-main",
+              of_at91sam9x5_clk_main_setup);
+
+static struct clk_master_characteristics * __init
+of_at91_clk_master_get_characteristics(struct device_node *np)
+{
+       struct clk_master_characteristics *characteristics;
+
+       characteristics = kzalloc(sizeof(*characteristics), GFP_KERNEL);
+       if (!characteristics)
+               return NULL;
+
+       if (of_at91_get_clk_range(np, "atmel,clk-output-range", 
&characteristics->output))
+               goto out_free_characteristics;
+
+       of_property_read_u32_array(np, "atmel,clk-divisors",
+                                  characteristics->divisors, 4);
+
+       characteristics->have_div3_pres =
+               of_property_read_bool(np, "atmel,master-clk-have-div3-pres");
+
+       return characteristics;
+
+out_free_characteristics:
+       kfree(characteristics);
+       return NULL;
+}
+
+static void __init
+of_at91_clk_master_setup(struct device_node *np,
+                        const struct clk_master_layout *layout)
+{
+       struct clk *hw;
+       unsigned int num_parents;
+       const char *parent_names[MASTER_SOURCE_MAX];
+       const char *name = np->name;
+       struct clk_master_characteristics *characteristics;
+       struct regmap *regmap;
+
+       num_parents = of_clk_get_parent_count(np);
+       if (num_parents == 0 || num_parents > MASTER_SOURCE_MAX)
+               return;
+
+       of_clk_parent_fill(np, parent_names, num_parents);
+
+       of_property_read_string(np, "clock-output-names", &name);
+
+       characteristics = of_at91_clk_master_get_characteristics(np);
+       if (!characteristics)
+               return;
+
+       regmap = syscon_node_to_regmap(of_get_parent(np));
+       if (IS_ERR(regmap))
+               return;
+
+       hw = at91_clk_register_master(regmap, name, num_parents,
+                                     parent_names, layout,
+                                     characteristics);
+       if (IS_ERR(hw))
+               goto out_free_characteristics;
+
+       of_clk_add_provider(np, of_clk_src_simple_get, hw);
+       return;
+
+out_free_characteristics:
+       kfree(characteristics);
+}
+
+static void __init of_at91rm9200_clk_master_setup(struct device_node *np)
+{
+       of_at91_clk_master_setup(np, &at91rm9200_master_layout);
+}
+CLK_OF_DECLARE(at91rm9200_clk_master, "atmel,at91rm9200-clk-master",
+              of_at91rm9200_clk_master_setup);
+
+static void __init of_at91sam9x5_clk_master_setup(struct device_node *np)
+{
+       of_at91_clk_master_setup(np, &at91sam9x5_master_layout);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_master, "atmel,at91sam9x5-clk-master",
+              of_at91sam9x5_clk_master_setup);
+
+static void __init
+of_at91_clk_periph_setup(struct device_node *np, u8 type)
+{
+       int num;
+       u32 id;
+       struct clk *hw;
+       const char *parent_name;
+       const char *name;
+       struct device_node *periphclknp;
+       struct regmap *regmap;
+
+       parent_name = of_clk_get_parent_name(np, 0);
+       if (!parent_name)
+               return;
+
+       num = of_get_child_count(np);
+       if (!num || num > PERIPHERAL_MAX)
+               return;
+
+       regmap = syscon_node_to_regmap(of_get_parent(np));
+       if (IS_ERR(regmap))
+               return;
+
+       for_each_child_of_node(np, periphclknp) {
+               if (of_property_read_u32(periphclknp, "reg", &id))
+                       continue;
+
+               if (id >= PERIPHERAL_MAX)
+                       continue;
+
+               if (of_property_read_string(np, "clock-output-names", &name))
+                       name = periphclknp->name;
+
+               if (type == PERIPHERAL_AT91RM9200) {
+                       hw = at91_clk_register_peripheral(regmap, name,
+                                                         parent_name, id);
+               } else {
+                       struct clk_range range = CLK_RANGE(0, 0);
+
+                       of_at91_get_clk_range(periphclknp,
+                                             "atmel,clk-output-range",
+                                             &range);
+
+                       hw = at91_clk_register_sam9x5_peripheral(regmap,
+                                                                name,
+                                                                parent_name,
+                                                                id, &range);
+               }
+
+               if (IS_ERR(hw))
+                       continue;
+
+               of_clk_add_provider(periphclknp, of_clk_src_simple_get, hw);
+       }
+}
+
+static void __init of_at91rm9200_clk_periph_setup(struct device_node *np)
+{
+       of_at91_clk_periph_setup(np, PERIPHERAL_AT91RM9200);
+}
+CLK_OF_DECLARE(at91rm9200_clk_periph, "atmel,at91rm9200-clk-peripheral",
+              of_at91rm9200_clk_periph_setup);
+
+static void __init of_at91sam9x5_clk_periph_setup(struct device_node *np)
+{
+       of_at91_clk_periph_setup(np, PERIPHERAL_AT91SAM9X5);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_periph, "atmel,at91sam9x5-clk-peripheral",
+              of_at91sam9x5_clk_periph_setup);
+
+static struct clk_pll_characteristics * __init
+of_at91_clk_pll_get_characteristics(struct device_node *np)
+{
+       int i;
+       int offset;
+       u32 tmp;
+       int num_output;
+       u32 num_cells;
+       struct clk_range input;
+       struct clk_range *output;
+       u8 *out = NULL;
+       u16 *icpll = NULL;
+       struct clk_pll_characteristics *characteristics;
+
+       if (of_at91_get_clk_range(np, "atmel,clk-input-range", &input))
+               return NULL;
+
+       if (of_property_read_u32(np, "#atmel,pll-clk-output-range-cells",
+                                &num_cells))
+               return NULL;
+
+       if (num_cells < 2 || num_cells > 4)
+               return NULL;
+
+       if (!of_get_property(np, "atmel,pll-clk-output-ranges", &tmp))
+               return NULL;
+       num_output = tmp / (sizeof(u32) * num_cells);
+
+       characteristics = kzalloc(sizeof(*characteristics), GFP_KERNEL);
+       if (!characteristics)
+               return NULL;
+
+       output = kcalloc(num_output, sizeof(*output), GFP_KERNEL);
+       if (!output)
+               goto out_free_characteristics;
+
+       if (num_cells > 2) {
+               out = kcalloc(num_output, sizeof(*out), GFP_KERNEL);
+               if (!out)
+                       goto out_free_output;
+       }
+
+       if (num_cells > 3) {
+               icpll = kcalloc(num_output, sizeof(*icpll), GFP_KERNEL);
+               if (!icpll)
+                       goto out_free_output;
+       }
+
+       for (i = 0; i < num_output; i++) {
+               offset = i * num_cells;
+               if (of_property_read_u32_index(np,
+                                              "atmel,pll-clk-output-ranges",
+                                              offset, &tmp))
+                       goto out_free_output;
+               output[i].min = tmp;
+               if (of_property_read_u32_index(np,
+                                              "atmel,pll-clk-output-ranges",
+                                              offset + 1, &tmp))
+                       goto out_free_output;
+               output[i].max = tmp;
+
+               if (num_cells == 2)
+                       continue;
+
+               if (of_property_read_u32_index(np,
+                                              "atmel,pll-clk-output-ranges",
+                                              offset + 2, &tmp))
+                       goto out_free_output;
+               out[i] = tmp;
+
+               if (num_cells == 3)
+                       continue;
+
+               if (of_property_read_u32_index(np,
+                                              "atmel,pll-clk-output-ranges",
+                                              offset + 3, &tmp))
+                       goto out_free_output;
+               icpll[i] = tmp;
+       }
+
+       characteristics->input = input;
+       characteristics->num_output = num_output;
+       characteristics->output = output;
+       characteristics->out = out;
+       characteristics->icpll = icpll;
+       return characteristics;
+
+out_free_output:
+       kfree(icpll);
+       kfree(out);
+       kfree(output);
+out_free_characteristics:
+       kfree(characteristics);
+       return NULL;
+}
+
+static void __init
+of_at91_clk_pll_setup(struct device_node *np,
+                     const struct clk_pll_layout *layout)
+{
+       u32 id;
+       struct clk *hw;
+       struct regmap *regmap;
+       const char *parent_name;
+       const char *name = np->name;
+       struct clk_pll_characteristics *characteristics;
+
+       if (of_property_read_u32(np, "reg", &id))
+               return;
+
+       parent_name = of_clk_get_parent_name(np, 0);
+
+       of_property_read_string(np, "clock-output-names", &name);
+
+       regmap = syscon_node_to_regmap(of_get_parent(np));
+       if (IS_ERR(regmap))
+               return;
+
+       characteristics = of_at91_clk_pll_get_characteristics(np);
+       if (!characteristics)
+               return;
+
+       hw = at91_clk_register_pll(regmap, name, parent_name, id, layout,
+                                  characteristics);
+       if (IS_ERR(hw))
+               goto out_free_characteristics;
+
+       of_clk_add_provider(np, of_clk_src_simple_get, hw);
+       return;
+
+out_free_characteristics:
+       kfree(characteristics);
+}
+
+static void __init of_at91rm9200_clk_pll_setup(struct device_node *np)
+{
+       of_at91_clk_pll_setup(np, &at91rm9200_pll_layout);
+}
+CLK_OF_DECLARE(at91rm9200_clk_pll, "atmel,at91rm9200-clk-pll",
+              of_at91rm9200_clk_pll_setup);
+
+static void __init of_at91sam9g45_clk_pll_setup(struct device_node *np)
+{
+       of_at91_clk_pll_setup(np, &at91sam9g45_pll_layout);
+}
+CLK_OF_DECLARE(at91sam9g45_clk_pll, "atmel,at91sam9g45-clk-pll",
+              of_at91sam9g45_clk_pll_setup);
+
+static void __init of_at91sam9g20_clk_pllb_setup(struct device_node *np)
+{
+       of_at91_clk_pll_setup(np, &at91sam9g20_pllb_layout);
+}
+CLK_OF_DECLARE(at91sam9g20_clk_pllb, "atmel,at91sam9g20-clk-pllb",
+              of_at91sam9g20_clk_pllb_setup);
+
+static void __init of_sama5d3_clk_pll_setup(struct device_node *np)
+{
+       of_at91_clk_pll_setup(np, &sama5d3_pll_layout);
+}
+CLK_OF_DECLARE(sama5d3_clk_pll, "atmel,sama5d3-clk-pll",
+              of_sama5d3_clk_pll_setup);
+
+static void __init
+of_at91sam9x5_clk_plldiv_setup(struct device_node *np)
+{
+       struct clk *hw;
+       const char *parent_name;
+       const char *name = np->name;
+       struct regmap *regmap;
+
+       parent_name = of_clk_get_parent_name(np, 0);
+
+       of_property_read_string(np, "clock-output-names", &name);
+
+       regmap = syscon_node_to_regmap(of_get_parent(np));
+       if (IS_ERR(regmap))
+               return;
+
+       hw = at91_clk_register_plldiv(regmap, name, parent_name);
+       if (IS_ERR(hw))
+               return;
+
+       of_clk_add_provider(np, of_clk_src_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_plldiv, "atmel,at91sam9x5-clk-plldiv",
+              of_at91sam9x5_clk_plldiv_setup);
+
+static void __init
+of_at91_clk_prog_setup(struct device_node *np,
+                      const struct clk_programmable_layout *layout)
+{
+       int num;
+       u32 id;
+       struct clk *hw;
+       unsigned int num_parents;
+       const char *parent_names[PROG_SOURCE_MAX];
+       const char *name;
+       struct device_node *progclknp;
+       struct regmap *regmap;
+
+       num_parents = of_clk_get_parent_count(np);
+       if (num_parents == 0 || num_parents > PROG_SOURCE_MAX)
+               return;
+
+       of_clk_parent_fill(np, parent_names, num_parents);
+
+       num = of_get_child_count(np);
+       if (!num || num > (PROG_ID_MAX + 1))
+               return;
+
+       regmap = syscon_node_to_regmap(of_get_parent(np));
+       if (IS_ERR(regmap))
+               return;
+
+       for_each_child_of_node(np, progclknp) {
+               if (of_property_read_u32(progclknp, "reg", &id))
+                       continue;
+
+               if (of_property_read_string(np, "clock-output-names", &name))
+                       name = progclknp->name;
+
+               hw = at91_clk_register_programmable(regmap, name,
+                                                   parent_names, num_parents,
+                                                   id, layout);
+               if (IS_ERR(hw))
+                       continue;
+
+               of_clk_add_provider(progclknp, of_clk_src_simple_get, hw);
+       }
+}
+
+static void __init of_at91rm9200_clk_prog_setup(struct device_node *np)
+{
+       of_at91_clk_prog_setup(np, &at91rm9200_programmable_layout);
+}
+CLK_OF_DECLARE(at91rm9200_clk_prog, "atmel,at91rm9200-clk-programmable",
+              of_at91rm9200_clk_prog_setup);
+
+static void __init of_at91sam9g45_clk_prog_setup(struct device_node *np)
+{
+       of_at91_clk_prog_setup(np, &at91sam9g45_programmable_layout);
+}
+CLK_OF_DECLARE(at91sam9g45_clk_prog, "atmel,at91sam9g45-clk-programmable",
+              of_at91sam9g45_clk_prog_setup);
+
+static void __init of_at91sam9x5_clk_prog_setup(struct device_node *np)
+{
+       of_at91_clk_prog_setup(np, &at91sam9x5_programmable_layout);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_prog, "atmel,at91sam9x5-clk-programmable",
+              of_at91sam9x5_clk_prog_setup);
+
+static void __init of_at91sam9260_clk_slow_setup(struct device_node *np)
+{
+       struct clk *hw;
+       const char *parent_names[2];
+       unsigned int num_parents;
+       const char *name = np->name;
+       struct regmap *regmap;
+
+       num_parents = of_clk_get_parent_count(np);
+       if (num_parents != 2)
+               return;
+
+       of_clk_parent_fill(np, parent_names, num_parents);
+       regmap = syscon_node_to_regmap(of_get_parent(np));
+       if (IS_ERR(regmap))
+               return;
+
+       of_property_read_string(np, "clock-output-names", &name);
+
+       hw = at91_clk_register_sam9260_slow(regmap, name, parent_names,
+                                           num_parents);
+       if (IS_ERR(hw))
+               return;
+
+       of_clk_add_provider(np, of_clk_src_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9260_clk_slow, "atmel,at91sam9260-clk-slow",
+              of_at91sam9260_clk_slow_setup);
+
+#ifdef CONFIG_HAVE_AT91_SMD
+#define SMD_SOURCE_MAX         2
+
+static void __init of_at91sam9x5_clk_smd_setup(struct device_node *np)
+{
+       struct clk *hw;
+       unsigned int num_parents;
+       const char *parent_names[SMD_SOURCE_MAX];
+       const char *name = np->name;
+       struct regmap *regmap;
+
+       num_parents = of_clk_get_parent_count(np);
+       if (num_parents == 0 || num_parents > SMD_SOURCE_MAX)
+               return;
+
+       of_clk_parent_fill(np, parent_names, num_parents);
+
+       of_property_read_string(np, "clock-output-names", &name);
+
+       regmap = syscon_node_to_regmap(of_get_parent(np));
+       if (IS_ERR(regmap))
+               return;
+
+       hw = at91sam9x5_clk_register_smd(regmap, name, parent_names,
+                                        num_parents);
+       if (IS_ERR(hw))
+               return;
+
+       of_clk_add_provider(np, of_clk_src_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_smd, "atmel,at91sam9x5-clk-smd",
+              of_at91sam9x5_clk_smd_setup);
+#endif /* CONFIG_HAVE_AT91_SMD */
+
+static void __init of_at91rm9200_clk_sys_setup(struct device_node *np)
+{
+       int num;
+       u32 id;
+       struct clk *hw;
+       const char *name;
+       struct device_node *sysclknp;
+       const char *parent_name;
+       struct regmap *regmap;
+
+       num = of_get_child_count(np);
+       if (num > (SYSTEM_MAX_ID + 1))
+               return;
+
+       regmap = syscon_node_to_regmap(of_get_parent(np));
+       if (IS_ERR(regmap))
+               return;
+
+       for_each_child_of_node(np, sysclknp) {
+               if (of_property_read_u32(sysclknp, "reg", &id))
+                       continue;
+
+               if (of_property_read_string(np, "clock-output-names", &name))
+                       name = sysclknp->name;
+
+               parent_name = of_clk_get_parent_name(sysclknp, 0);
+
+               hw = at91_clk_register_system(regmap, name, parent_name, id);
+               if (IS_ERR(hw))
+                       continue;
+
+               of_clk_add_provider(sysclknp, of_clk_src_simple_get, hw);
+       }
+}
+CLK_OF_DECLARE(at91rm9200_clk_sys, "atmel,at91rm9200-clk-system",
+              of_at91rm9200_clk_sys_setup);
+
+#ifdef CONFIG_HAVE_AT91_USB_CLK
+#define USB_SOURCE_MAX         2
+
+static void __init of_at91sam9x5_clk_usb_setup(struct device_node *np)
+{
+       struct clk *hw;
+       unsigned int num_parents;
+       const char *parent_names[USB_SOURCE_MAX];
+       const char *name = np->name;
+       struct regmap *regmap;
+
+       num_parents = of_clk_get_parent_count(np);
+       if (num_parents == 0 || num_parents > USB_SOURCE_MAX)
+               return;
+
+       of_clk_parent_fill(np, parent_names, num_parents);
+
+       of_property_read_string(np, "clock-output-names", &name);
+
+       regmap = syscon_node_to_regmap(of_get_parent(np));
+       if (IS_ERR(regmap))
+               return;
+
+       hw = at91sam9x5_clk_register_usb(regmap, name, parent_names,
+                                        num_parents);
+       if (IS_ERR(hw))
+               return;
+
+       of_clk_add_provider(np, of_clk_src_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_usb, "atmel,at91sam9x5-clk-usb",
+              of_at91sam9x5_clk_usb_setup);
+
+static void __init of_at91sam9n12_clk_usb_setup(struct device_node *np)
+{
+       struct clk *hw;
+       const char *parent_name;
+       const char *name = np->name;
+       struct regmap *regmap;
+
+       parent_name = of_clk_get_parent_name(np, 0);
+       if (!parent_name)
+               return;
+
+       of_property_read_string(np, "clock-output-names", &name);
+
+       regmap = syscon_node_to_regmap(of_get_parent(np));
+       if (IS_ERR(regmap))
+               return;
+
+       hw = at91sam9n12_clk_register_usb(regmap, name, parent_name);
+       if (IS_ERR(hw))
+               return;
+
+       of_clk_add_provider(np, of_clk_src_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9n12_clk_usb, "atmel,at91sam9n12-clk-usb",
+              of_at91sam9n12_clk_usb_setup);
+
+static void __init of_at91rm9200_clk_usb_setup(struct device_node *np)
+{
+       struct clk *hw;
+       const char *parent_name;
+       const char *name = np->name;
+       u32 divisors[4] = {0, 0, 0, 0};
+       struct regmap *regmap;
+
+       parent_name = of_clk_get_parent_name(np, 0);
+       if (!parent_name)
+               return;
+
+       of_property_read_u32_array(np, "atmel,clk-divisors", divisors, 4);
+       if (!divisors[0])
+               return;
+
+       of_property_read_string(np, "clock-output-names", &name);
+
+       regmap = syscon_node_to_regmap(of_get_parent(np));
+       if (IS_ERR(regmap))
+               return;
+       hw = at91rm9200_clk_register_usb(regmap, name, parent_name, divisors);
+       if (IS_ERR(hw))
+               return;
+
+       of_clk_add_provider(np, of_clk_src_simple_get, hw);
+}
+CLK_OF_DECLARE(at91rm9200_clk_usb, "atmel,at91rm9200-clk-usb",
+              of_at91rm9200_clk_usb_setup);
+#endif /* CONFIG_HAVE_AT91_USB_CLK */
+
+#ifdef CONFIG_HAVE_AT91_UTMI
+static void __init of_at91sam9x5_clk_utmi_setup(struct device_node *np)
+{
+       struct clk *hw;
+       const char *parent_name;
+       const char *name = np->name;
+       struct regmap *regmap_pmc, *regmap_sfr;
+
+       parent_name = of_clk_get_parent_name(np, 0);
+
+       of_property_read_string(np, "clock-output-names", &name);
+
+       regmap_pmc = syscon_node_to_regmap(of_get_parent(np));
+       if (IS_ERR(regmap_pmc))
+               return;
+
+       /*
+        * If the device supports different mainck rates, this value has to be
+        * set in the UTMI Clock Trimming register.
+        * - 9x5: mainck supports several rates but it is indicated that a
+        *   12 MHz is needed in case of USB.
+        * - sama5d3 and sama5d2: mainck supports several rates. Configuring
+        *   the FREQ field of the UTMI Clock Trimming register is mandatory.
+        * - sama5d4: mainck is at 12 MHz.
+        *
+        * We only need to retrieve sama5d3 or sama5d2 sfr regmap.
+        */
+       regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d3-sfr");
+       if (IS_ERR(regmap_sfr)) {
+               regmap_sfr = 
syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
+               if (IS_ERR(regmap_sfr))
+                       regmap_sfr = NULL;
+       }
+
+       hw = at91_clk_register_utmi(regmap_pmc, regmap_sfr, name, parent_name);
+       if (IS_ERR(hw))
+               return;
+
+       of_clk_add_provider(np, of_clk_src_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_utmi, "atmel,at91sam9x5-clk-utmi",
+              of_at91sam9x5_clk_utmi_setup);
+#endif /* CONFIG_HAVE_AT91_UTMI */
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Reply via email to