The current support for the ZII Dev Boards time out on eth1 when
booting from net, which takes a while:
Booting entry 'net'
eth0: 100Mbps full duplex link detected
T T T eth0: DHCP client bound to address 192.168.203.22
WARNING: eth1: No MAC address set. Using random address 3a:e8:f7:52:55:6d
T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T
T T
Loading ARM Linux zImage '/mnt/tftp/none-linux-zii-dev-rev-b-2'
eth1 is the DSA master interface and has no use within barebox,
so disable the interface to allow Barebox to boot right away from eth0.
Suggested-by: Andrey Smirnov <[email protected]>
Signed-off-by: Vivien Didelot <[email protected]>
---
.../zii-vf610-dev/defaultenv-zii-vf610-dev/nv/dev.eth1.mode | 1 +
1 file changed, 1 insertion(+)
create mode 100644
arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/nv/dev.eth1.mode
diff --git
a/arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/nv/dev.eth1.mode
b/arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/nv/dev.eth1.mode
new file mode 100644
index 000000000..87e7bdaae
--- /dev/null
+++ b/arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/nv/dev.eth1.mode
@@ -0,0 +1 @@
+disabled
\ No newline at end of file
--
2.21.0
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
