On Mon, May 27, 2019 at 01:18:51PM -0700, Andrey Smirnov wrote:
> Add a driver working on top of ubootvar device and exposing U-Boot
> environment variable data as files.
>
> Signed-off-by: Andrey Smirnov <[email protected]>
> Signed-off-by: Cory Tusar <[email protected]>
> ---
> fs/Kconfig | 8 +
> fs/Makefile | 1 +
> fs/ubootvarfs.c | 499 ++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 508 insertions(+)
> create mode 100644 fs/ubootvarfs.c
>
> diff --git a/fs/Kconfig b/fs/Kconfig
> index e3a95321c..adf281a5b 100644
> --- a/fs/Kconfig
> +++ b/fs/Kconfig
> @@ -118,4 +118,12 @@ config FS_RATP
> This enables support for transferring files over RATP. A host can
> export a directory which can then be mounted under barebox.
>
> +config FS_UBOOTVARFS
> + bool
> + depends on UBOOTVAR
> + prompt "U-Boot environment variable filesystem support"
> + help
> + This filesystem driver provides access to U-Boot environment
> + variables.
> +
> endmenu
> diff --git a/fs/Makefile b/fs/Makefile
> index ac3e6a03a..9889a6507 100644
> --- a/fs/Makefile
> +++ b/fs/Makefile
> @@ -18,3 +18,4 @@ obj-$(CONFIG_FS_SMHFS) += smhfs.o
> obj-$(CONFIG_FS_PSTORE) += pstore/
> obj-$(CONFIG_FS_SQUASHFS) += squashfs/
> obj-$(CONFIG_FS_RATP) += ratpfs.o
> +obj-$(CONFIG_FS_UBOOTVARFS) += ubootvarfs.o
> diff --git a/fs/ubootvarfs.c b/fs/ubootvarfs.c
> new file mode 100644
> index 000000000..8de97b2de
> --- /dev/null
> +++ b/fs/ubootvarfs.c
> @@ -0,0 +1,499 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Zodiac Inflight Innovations
> + */
> +
> +#define pr_fmt(fmt) "ubootvarfs: " fmt
> +
> +#include <common.h>
> +#include <driver.h>
> +#include <init.h>
> +#include <malloc.h>
> +#include <fs.h>
> +#include <string.h>
> +#include <errno.h>
> +#include <linux/stat.h>
> +#include <xfuncs.h>
> +#include <fcntl.h>
> +#include <efi.h>
> +#include <wchar.h>
> +#include <linux/err.h>
> +#include <linux/ctype.h>
> +
> +/**
> + * Some theory of operation:
> + *
> + * U-Boot environment variable data is expected to be presented as a
> + * single blob containing an arbitrary number "<key>=<value>\0" paris
s/paris/pairs/
> + * without any other auxiliary information (accomplished by ubootvar
> + * driver)
> + *
> + * Filesystem driver code in this file parses above data an creates a
> + * linked list of all of the "variables" found (see @ubootvarfs_var to
> + * what information is recorded).
> + *
> + * With that in place reading or writing file data becomes as trivial
> + * as looking up a variable in the linked list by name and then
> + * memcpy()-ing bytes from its value region.
> + *
> + * The only moderately tricky part is resising a given file/variable
s/resising/resizing/
> + * since, given the underlying data format, it requires us to move all
> + * of the key/value data that comes after the given file/variable as
> + * well as to adjust all of the cached offsets stored in varaible
s/varaible/variable/
> + * linked list. See ubootvarfs_adjust() for the implementation
> + * details.
Wouldn't it be easier and more straight forward to serialize and
deserialize the U-Boot environment as a whole rather than trying to
adjust an in-memory representation each time the env is changed?
> +static int ubootvarfs_create(struct inode *dir, struct dentry *dentry,
> + umode_t mode)
> +{
> + struct super_block *sb = dir->i_sb;
> + struct fs_device_d *fsdev = container_of(sb, struct fs_device_d, sb);
> + struct ubootvarfs_data *data = fsdev->dev.priv;
> + struct inode *inode;
> + struct ubootvarfs_var *var;
> + size_t len = strlen(dentry->name);
> + /*
> + * We'll be adding <varname>=\0\0 to the end of our data, so
> + * we need to make sure there's enough room for it. Note that
> + * + 3 is to accoutn for '=', and two '\0' from above
s/accoutn/account/
> +static void ubootvarfs_remove(struct device_d *dev)
> +{
> + struct ubootvarfs_data *data = dev->priv;
> +
> + flush(data->fd);
> + close(data->fd);
> + free(data);
> +}
So the environment is written only when the FS is unmounted. We might
want to have some other method to trigger writing. I don't know how this
method may look yet though.
Sasch
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
