Hello,
Thanks for your answer. Yes i am able to connect via PUTTY to the target.
Then I should use some adb commands in order to push the new
barebox/firmware ? do you know where I could find some examples?
Also I have a question: purpose of this activity is for me to be
able to flash some imx6ul boards that have no firmware: no barebox.
So I know hardware config for the port is otg mode but as I have no
barebox running them before I am wondering if I will be able to
connect via PUTTY if I do not set the ACM gadget from barebox?
Thanks,
Mihaita
On Wed, Oct 16, 2019 at 10:51 AM Ahmad Fatoum <[email protected]> wrote:
>
> On 10/16/19 10:40 AM, Mihaita Ivascu wrote:
> > Hello again,
> >
> > I have the target in otg peripheral mode, ADB and fastboot drivers
> > installed but fastboot does not list any device. The board is detected
> > in device manager
>
> Try enabling the ACM gadget in barebox and connect with PuTTY and see if
> at least that works. It worked for me on Windows with another i.MX board
> a month ago.
>
> As for fastboot, I don't know how to configure it on Windows, but surely
> Android Modding boards will have you covered there.
>
> > Please see attachment. Any ideas how should I proceed? Thanks for
> > the support.
>
> You can enable the ACM gadget in barebox and see if that works, I tested
> it on Windows with an i.MX board a month ago
>
> Cheers
> Ahmad
>
> >
> > Thanks,
> > Mihaita
> >
> > On Wed, Oct 16, 2019 at 9:32 AM Mihaita Ivascu
> > <[email protected]> wrote:
> >>
> >> Thanks. I have installed ADB and fastboot drivers for Win from
> >> https://www.getdroidtips.com/how-to-install-adb-and-fastboot-on-windows/
> >> I have installed according to the attachment.
> >> But is not recognized in Windows. I did reboot the system after
> >> installation but did not add any new env variable.
> >>
> >> H:\>fastboot devices -l
> >> 'fastboot' is not recognized as an internal or external command,
> >> operable program or batch file.
> >>
> >> Thanks,
> >> Mihaita
> >>
> >>
> >> On Tue, Oct 15, 2019 at 4:44 PM Ahmad Fatoum <[email protected]>
> >> wrote:
> >>>
> >>> On 10/15/19 4:41 PM, Mihaita Ivascu wrote:
> >>>> barebox@Phytec phyCORE-i.MX6 Ultra Lite SOM:/ fastboot devices -l
> >>> That's what you run on your host system, not on the target.
> >>> --
> >>> Pengutronix e.K. | |
> >>> Industrial Linux Solutions | http://www.pengutronix.de/ |
> >>> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> >>> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
