mode and alt are printed with the dev_dbg before they are initialized.
Remedy this by moving the dev_dbg after them.
Signed-off-by: Ahmad Fatoum <a.fat...@pengutronix.de>
---
drivers/pinctrl/pinctrl-stm32.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-stm32.c b/drivers/pinctrl/pinctrl-stm32.c
index 7f04cea50b75..ab121998a37f 100644
--- a/drivers/pinctrl/pinctrl-stm32.c
+++ b/drivers/pinctrl/pinctrl-stm32.c
@@ -157,13 +157,13 @@ static int stm32_pinctrl_set_state(struct pinctrl_device
*pdev, struct device_no
if (offset < 0)
return -ENODEV;
+ mode = stm32_gpio_get_mode(func);
+ alt = stm32_gpio_get_alt(func);
+
dev_dbg(pdev->dev, "configuring port %s pin %u
with:\n\t"
"fn %u, mode %u, alt %u\n",
bank->name, offset, func, mode, alt);
- mode = stm32_gpio_get_mode(func);
- alt = stm32_gpio_get_alt(func);
-
clk_enable(bank->clk);
__stm32_pmx_set_mode(bank->base, offset, mode, alt);
--
2.23.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
