On 10/28/19 12:31 PM, Sascha Hauer wrote:
> On Mon, Oct 28, 2019 at 12:18:31AM +0100, Ahmad Fatoum wrote:
>> Now with the SD/MMC controller supported, lets add a bbu handler, so we
>> can use it to update the second stage boot loader partition.
>>
>> While doing this, I noticed that making use of the bus-width = <4>
>> property in the device tree now makes mmc usage fail when reading the
>> environment:
>>
>> ERROR: error SDMMC_STA_DCRCFAIL (0x81042) for cmd 18
>> ERROR: stm32_sdmmc2_end_cmd: error SDMMC_STA_CTIMEOUT (0x4) for cmd 12
>> WARNING: stm32_sdmmc2_send_cmd: cmd 12 failed, retrying ...
>> ERROR: stm32_sdmmc2_end_cmd: error SDMMC_STA_CTIMEOUT (0x4) for cmd 12
>> WARNING: stm32_sdmmc2_send_cmd: cmd 12 failed, retrying ...
>> ERROR: stm32_sdmmc2_end_cmd: error SDMMC_STA_CTIMEOUT (0x4) for cmd 12
>> WARNING: stm32_sdmmc2_send_cmd: cmd 12 failed, retrying ...
>> ERROR: stm32_sdmmc2_end_cmd: error SDMMC_STA_CTIMEOUT (0x4) for cmd 12
>
> Could you make this an extra patch?
Can do.
>
>>
>> We'll want to fix this eventually, but for now force the bus width to 1
>> and print a notice to the console that we've done so. This is not
>> enough, however because it then fails at loading the kernel from MMC:
>>
>> ERROR: Time out on waiting for SDMMC_STA. cmd 18
>> ERROR: stm32_sdmmc2_end_cmd: error SDMMC_STA_CTIMEOUT (0x804) for cmd 12
>> WARNING: stm32_sdmmc2_send_cmd: cmd 18 failed, retrying ...
>>
>> Fixing the max frequency at 208 MHz fixes this. So do that and print a
>> notice for it as well.
>>
>> @@ -627,11 +627,22 @@ static int stm32_sdmmc2_probe(struct amba_device *adev,
>> if (IS_ERR(priv->reset_ctl))
>> priv->reset_ctl = NULL;
>>
>> + mci_of_parse(&priv->mci);
>> +
>> mci->f_min = 400000;
>> - /* f_max is taken from kernel v5.3 variant_stm32_sdmmc */
>> - mci->f_max = 208000000;
>> mci->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
>>
>> + if (mci->f_max != 208000000) {
>> + /* f_max is taken from kernel v5.3 variant_stm32_sdmmc */
>> + dev_notice(dev, "Fixing max-frequency to 208 MHz due to driver
>> limitation\n");
>> + mci->f_max = 208000000;
>> + }
>
> f_max previously was hardcoded to 208MHz. It still is now, so this can't
> fix anything.
> Looking at the device tree we have max-frequency = <120000000>, so you
> probably mean that it doesn't work with the 120MHz specified here,
> right? If it doesn't work with a lower frequency it really looks fishy.
Exactly.
>
> Could you have another look what is going on here?
I intend to, but not sure if it'll be before the cut-off for v2019.12.0.
I'd like for that release to have full STM32MP support.
I'll send a v2.
>
> Sascha
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox