The board support is likely copied from the freescale-mx6-sabrelite,
which requires some GPIOs setup before Ethernet is usable. There is no
GPIOs used in this board's code, so remove the comment and along it the
<gpio.h> header.
Signed-off-by: Ahmad Fatoum <a.fat...@pengutronix.de>
---
arch/arm/boards/embedsky-e9/board.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/arch/arm/boards/embedsky-e9/board.c
b/arch/arm/boards/embedsky-e9/board.c
index 0f47677bb06a..e5f92636fbc3 100644
--- a/arch/arm/boards/embedsky-e9/board.c
+++ b/arch/arm/boards/embedsky-e9/board.c
@@ -22,7 +22,6 @@
#include <init.h>
#include <environment.h>
#include <mach/imx6-regs.h>
-#include <gpio.h>
#include <asm/armlinux.h>
#include <generated/mach-types.h>
#include <partition.h>
@@ -102,8 +101,4 @@ static int e9_coredevices_init(void)
return 0;
}
-/*
- * Do this before the fec initializes but after our
- * gpios are available.
- */
coredevice_initcall(e9_coredevices_init);
--
2.24.0.rc1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
