Avoid the example bitstream header to validate the bitstream that should
be loaded into the FPGA. The header is mostly 0xFFFFFFFF with a few
special values at a certain offsets and can be better described with the
offsets and their magic values.
As a drive by, this fixes/removes a broken check in the header
validation. The != operator has a higher precedence than ?: and this
check should have had parenthesis around the ?: expression:
bin_header[i] != (byte_order == XILINX_BYTE_ORDER_BIT) ?
bin_format[i] : __swab32(bin_format[i])
Signed-off-by: Michael Tretter <[email protected]>
---
drivers/firmware/zynqmp-fpga.c | 121 +++++++++++++++++----------------
1 file changed, 62 insertions(+), 59 deletions(-)
diff --git a/drivers/firmware/zynqmp-fpga.c b/drivers/firmware/zynqmp-fpga.c
index 1728e2a954..e02667355f 100644
--- a/drivers/firmware/zynqmp-fpga.c
+++ b/drivers/firmware/zynqmp-fpga.c
@@ -24,11 +24,32 @@
#define ZYNQMP_PM_VERSION_1_1_FEATURES (ZYNQMP_PM_FEATURE_BYTE_ORDER_IRREL | \
ZYNQMP_PM_FEATURE_SIZE_NOT_NEEDED)
+/*
+ * Xilinx KU040 Bitstream Composition:
+ *
+ * Bitstream can be provided with an optinal header (`struct bs_header`).
+ * The true bitstream starts with the binary-header composed of 21 words:
+ *
+ * 0: 0xFFFFFFFF (Dummy pad word)
+ * ...
+ * 15: 0xFFFFFFFF (Dummy pad word)
+ * 16: 0x000000BB (Bus width auto detect word 1)
+ * 17: 0x11220044 (Bus width auto detect word 2)
+ * 18: 0xFFFFFFFF (Dummy pad word)
+ * 19: 0xFFFFFFFF (Dummy pad word)
+ * 20: 0xAA995566 (Sync word)
+ *
+ * See Xilinx UG570 (v1.11) September 30 2019, Chapter 9 "Configuration
+ * Details - Bitstream Composition" for further details.
+ */
#define DUMMY_WORD 0xFFFFFFFF
-#define BUS_WIDTH_WORD_1 0x000000BB
-#define BUS_WIDTH_WORD_2 0x11220044
+#define BUS_WIDTH_AUTO_DETECT1_OFFSET 16
+#define BUS_WIDTH_AUTO_DETECT1 0x000000BB
+#define BUS_WIDTH_AUTO_DETECT2_OFFSET 17
+#define BUS_WIDTH_AUTO_DETECT2 0x11220044
+#define SYNC_WORD_OFFSET 20
#define SYNC_WORD 0xAA995566
-#define SYNC_WORD_OFFS 20
+#define BIN_HEADER_LENGTH 21
enum xilinx_byte_order {
XILINX_BYTE_ORDER_BIT,
@@ -58,48 +79,6 @@ struct bs_header_entry {
char data[0];
} __attribute__ ((packed));
-/*
- * Xilinx KU040 Bitstream Composition:
- * Bitstream can be provided with an optinal header (`struct bs_header`).
- * The true bitstream starts with the binary-header composed of 21 words:
- *
- * 1: 0xFFFFFFFF (Dummy pad word)
- * ...
- * 16: 0xFFFFFFFF (Dummy pad word)
- * 17: 0x000000BB (Bus width auto detect word 1)
- * 18: 0x11220044 (Bus width auto detect word 2)
- * 19: 0xFFFFFFFF (Dummy pad word)
- * 20: 0xFFFFFFFF (Dummy pad word)
- * 21: 0xAA995566 (Sync word)
- *
- * Please refer to Xilinx UG570 (v1.11) September 30 2019,
- * Chapter 9 Configuration Details - Bitstream Composition
- * for further details!
- */
-static const u32 bin_format[] = {
- DUMMY_WORD,
- DUMMY_WORD,
- DUMMY_WORD,
- DUMMY_WORD,
- DUMMY_WORD,
- DUMMY_WORD,
- DUMMY_WORD,
- DUMMY_WORD,
- DUMMY_WORD,
- DUMMY_WORD,
- DUMMY_WORD,
- DUMMY_WORD,
- DUMMY_WORD,
- DUMMY_WORD,
- DUMMY_WORD,
- DUMMY_WORD,
- BUS_WIDTH_WORD_1,
- BUS_WIDTH_WORD_2,
- DUMMY_WORD,
- DUMMY_WORD,
- SYNC_WORD,
-};
-
static void copy_words_swapped(u32 *dst, const u32 *src, size_t size)
{
int i;
@@ -111,36 +90,59 @@ static void copy_words_swapped(u32 *dst, const u32 *src,
size_t size)
static int get_byte_order(const u32 *bin_header, size_t size,
enum xilinx_byte_order *byte_order)
{
- if (size < sizeof(bin_format))
+ if (size < BIN_HEADER_LENGTH * sizeof(*bin_header))
return -EINVAL;
- if (bin_header[SYNC_WORD_OFFS] == SYNC_WORD) {
+ if (bin_header[SYNC_WORD_OFFSET] == SYNC_WORD) {
*byte_order = XILINX_BYTE_ORDER_BIT;
return 0;
}
- if (bin_header[SYNC_WORD_OFFS] == __swab32(SYNC_WORD)) {
- *byte_order = XILINX_BYTE_ORDER_BIN;
+ if (bin_header[SYNC_WORD_OFFSET] == __swab32(SYNC_WORD)) {
+ *byte_order = XILINX_BYTE_ORDER_BIN;
return 0;
}
return -EINVAL;
}
-static int is_bin_header_valid(const u32 *bin_header, size_t size,
- enum xilinx_byte_order byte_order)
+static bool is_bin_header_valid(const u32 *bin_header, size_t size,
+ enum xilinx_byte_order byte_order)
{
- int i;
+ size_t i;
- if (size < ARRAY_SIZE(bin_format))
- return 0;
+ if (size < BIN_HEADER_LENGTH * sizeof(*bin_header))
+ return false;
+
+ for (i = 0; i < BIN_HEADER_LENGTH; i++, bin_header++) {
+ u32 current;
+ u32 expected;
+
+ if (byte_order == XILINX_BYTE_ORDER_BIT)
+ current = *bin_header;
+ else
+ current = __swab32(*bin_header);
- for (i = 0; i < ARRAY_SIZE(bin_format); i++)
- if (bin_header[i] != (byte_order == XILINX_BYTE_ORDER_BIT) ?
- bin_format[i] : __swab32(bin_format[i]))
- return 0;
+ switch (i) {
+ case BUS_WIDTH_AUTO_DETECT1_OFFSET:
+ expected = BUS_WIDTH_AUTO_DETECT1;
+ break;
+ case BUS_WIDTH_AUTO_DETECT2_OFFSET:
+ expected = BUS_WIDTH_AUTO_DETECT2;
+ break;
+ case SYNC_WORD_OFFSET:
+ expected = SYNC_WORD;
+ break;
+ default:
+ expected = DUMMY_WORD;
+ break;
+ }
+
+ if (current != expected)
+ return false;
+ }
- return 1;
+ return true;
}
static int get_header_length(const char *header, size_t size)
@@ -227,6 +229,7 @@ static int fpgamgr_program_finish(struct firmware_handler
*fh)
goto err_free;
if (!is_bin_header_valid(body, body_length, byte_order)) {
+ dev_err(&mgr->dev, "Invalid bitstream header\n");
status = -EINVAL;
goto err_free;
}
--
2.20.1
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
