Hi Enrico,

thank you very much for your help. 
I'm using barebox_2019.01.0-phy4-r7.0 now. In thud I used barebox_2017.12.0
The image is built using my own ims layer which depends on core-image-minimal
LAYERDEPENDS_ims-layer = "core-image-minimal openembedded-layer phytec-layer"
Its using the meta-phytec Layer and a custom layer from phytec named 
meta-ksp0663.
Forgot to mention that rauc is used too, which moved from 1.1 to now 1.2.
Just changed the LAYERSERIES_COMPAT to "zeus" here to check whether yocto zeus 
works.

Is there some info what to change in the devicetree and so on when moving to 
warrior/zeus?
In thud this worked.

Thank you
Regards

hu

> -----Original Message-----
> From: Enrico Joerns <e...@pengutronix.de> 
> Sent: Wednesday, 15 January 2020 14:03
> To: Hans-Ulrich Schlieben <hu.schlie...@codewrights.de>; 
> yo...@lists.yoctoproject.org
> Cc: barebox@lists.infradead.org
> Subject: Re: [yocto] #yocto bootchooser: Cannot get state 'state'
> 
> Hi,
> 
> this is mainly a barebox-related question, thus I'd suggest asking it on the 
> barebox ML.
> 
> [cc-ing barebox mailing list]
> 
> On Wed, 2020-01-15 at 04:10 -0800, hu.schlie...@codewrights.de wrote:
> > Hi,
> > 
> > booting the new yocto zeus system manually by "boot mmc" works fine 
> > but default bootchooser fails with:
> > 
> > bootchooser: Cannot get state 'state'
> > Nothing bootable found on 'bootchooser'
> > Nothing bootable found
> 
> Looks like the state node is missing in your device tree.
> Which version of barebox do you use?
> And from which layer / recipe?
> 
> > Building the "same" image in yocto thud works fine. The boot variables 
> > are:
> > 
> > * BOOT_system0_.default: 3
> > * BOOT_system1_.default: 3
> > * allow_color: 0
> > * autoboot_timeout: 3
> > * boot.default: bootchooser
> >   boot.watchdog_timeout: 0
> >   bootchooser.default_attempts: 3
> >   bootchooser.default_priority: 1
> >   bootchooser.disable_on_zero_attempts: 0
> >   bootchooser.reset_attempts:  (list: "power-on", "all-zero")
> >   bootchooser.reset_priorities:
> >   bootchooser.retry: 0
> > * bootchooser.state_prefix: state.bootstate
> > * bootchooser.system0.boot: mmc
> > * bootchooser.system0.default_attempts: 3
> > * bootchooser.system0.default_priority: 20
> > * bootchooser.system1.boot: mmc1
> > * bootchooser.system1.default_attempts: 3
> > * bootchooser.system1.default_priority: 21
> > * bootchooser.targets: system0 system1
> >   bootm.appendroot: 0
> > ...
> > 
> 
> Regards, Enrico

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Reply via email to