Hi Roland, ----- On 16 Jan, 2020, at 10:49, Roland Hieber [email protected] wrote:
> On Wed, Jan 15, 2020 at 11:26:45AM +0100, Clement Leger wrote: >> Kalray k1c core is embedded in Kalray Coolidge SoC. This core has the >> following features: >> - 32/64 bits >> - 6-issue VLIW architecture >> - 64 x 64bits general purpose registers >> - SIMD instructions >> - little-endian >> >> This port is a 64 bits one and allows to boot up to a barebox prompt on a >> k200 >> board. k1c support for clocksource and watchdog is also part of this port. >> >> In order to build a usable toolchain, build scripts are provided at the >> following address: https://github.com/kalray/build-scripts. >> >> Kalray uses FOSS which is available at https://github.com/kalray >> >> Clement Leger (5): >> k1c: Initial Kalray Coolidge (k1c) architecture support >> k1c: Add processor definitions >> k1c: Add support for device tree >> clocksource: k1c: Add k1c clocksource support >> watchdog: k1c: Add k1c watchdog support > > Uuuh, a shiny new architecture! You might also want to add some > (minimal) documentation in Documentation/boards/ to advertise it. This > way it will also appear on > https://www.barebox.org/doc/latest/boards.html :) Nice, thanks for the info ! Clément > > - Roland > > -- > Roland Hieber, Pengutronix e.K. | [email protected] | > Steuerwalder Str. 21 | https://www.pengutronix.de/ | > 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
