A status = "disabled" node should act the same as if it were uncommented, with the difference that a board that does have the resistor populated could easily fixup the status.
Signed-off-by: Ahmad Fatoum <[email protected]> --- arch/arm/dts/imx7d-pba-c-09.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/dts/imx7d-pba-c-09.dtsi b/arch/arm/dts/imx7d-pba-c-09.dtsi index 7106d6bfd735..0b2a987fd440 100644 --- a/arch/arm/dts/imx7d-pba-c-09.dtsi +++ b/arch/arm/dts/imx7d-pba-c-09.dtsi @@ -36,7 +36,6 @@ }; /* Enable if R9 is populated. Conflicts with userbtn2 on PEB-EVAL-02 */ - /* reg_can1_3v3: regulator@2 { compatible = "regulator-fixed"; reg = <2>; @@ -45,8 +44,8 @@ regulator-max-microvolt = <3300000>; gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; enable-active-high; + status = "disabled"; }; - */ }; }; -- 2.27.0 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
