The i2c, MCI and reset controller peripherals are STM32-specific. There is no reason to ask uses on oldconfig about it, thus make them depend on ARCH_STM32MP || COMPILE_TEST.
Signed-off-by: Ahmad Fatoum <[email protected]> --- drivers/i2c/busses/Kconfig | 1 + drivers/mci/Kconfig | 1 + drivers/reset/Kconfig | 1 + 3 files changed, 3 insertions(+) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 21d2cb21cf5a..3bc8d1b8d2bc 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -59,5 +59,6 @@ config I2C_STM32 bool "STM32 I2C master driver" select RESET_CONTROLLER depends on HAVE_CLK + depends on ARCH_STM32MP || COMPILE_TEST endmenu diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig index 6ae1e812528c..d1695c678c30 100644 --- a/drivers/mci/Kconfig +++ b/drivers/mci/Kconfig @@ -177,6 +177,7 @@ config MCI_STM32_SDMMC2 bool "STMicroelectronics STM32H7 SD/MMC Host Controller support" depends on ARM_AMBA depends on RESET_CONTROLLER + depends on ARCH_STM32MP || COMPILE_TEST help This selects support for the SD/MMC controller on STM32H7 SoCs. If you have a board based on such a SoC and with a SD/MMC slot, diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 9befc5e55f32..316ece9e7176 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -23,6 +23,7 @@ config RESET_IMX7 config RESET_STM32 bool "STM32 Reset Driver" + depends on ARCH_STM32MP || COMPILE_TEST help This enables the reset controller driver for STM32MP and STM32 MCUs. -- 2.27.0 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
