Newer i.MX dtsi files expect three pwm cells. The third cell contains flags. Add a third cell containing empty flags.
Signed-off-by: Sascha Hauer <[email protected]> --- arch/arm/dts/imx51-genesi-efika-sb.dts | 2 +- arch/arm/dts/imx53-guf-vincell-lt.dts | 2 +- arch/arm/dts/imx53-guf-vincell.dts | 2 +- arch/arm/dts/imx6dl-lanmcu.dts | 2 +- arch/arm/dts/imx6dl-prtvt7.dts | 2 +- arch/arm/dts/imx6q-guf-santaro.dts | 2 +- arch/arm/dts/imx6q-prti6q.dts | 2 +- arch/arm/dts/imx6qdl-mba6x.dtsi | 2 +- arch/arm/dts/imx6qp-prtwd3.dts | 4 ++-- arch/arm/dts/imx7d-pba-c-09.dtsi | 2 +- 10 files changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/arm/dts/imx51-genesi-efika-sb.dts b/arch/arm/dts/imx51-genesi-efika-sb.dts index fb62fe2c72..7e3017f981 100644 --- a/arch/arm/dts/imx51-genesi-efika-sb.dts +++ b/arch/arm/dts/imx51-genesi-efika-sb.dts @@ -94,7 +94,7 @@ backlight: backlight { compatible = "pwm-backlight"; enable-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; - pwms = <&pwm1 0 78770>; + pwms = <&pwm1 0 78770 0>; brightness-levels = <0 1 2 4 8 16 32 64 128 255>; default-brightness-level = <9>; pinctrl-names = "default"; diff --git a/arch/arm/dts/imx53-guf-vincell-lt.dts b/arch/arm/dts/imx53-guf-vincell-lt.dts index 0cc6ffc288..d14c0dbf9c 100644 --- a/arch/arm/dts/imx53-guf-vincell-lt.dts +++ b/arch/arm/dts/imx53-guf-vincell-lt.dts @@ -67,7 +67,7 @@ backlight: backlight { compatible = "pwm-backlight"; - pwms = <&pwm1 0 50000>; + pwms = <&pwm1 0 50000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; power-supply = <&ldo3>; diff --git a/arch/arm/dts/imx53-guf-vincell.dts b/arch/arm/dts/imx53-guf-vincell.dts index 9686a2cb57..a5f86ccf7e 100644 --- a/arch/arm/dts/imx53-guf-vincell.dts +++ b/arch/arm/dts/imx53-guf-vincell.dts @@ -49,7 +49,7 @@ backlight: backlight { compatible = "pwm-backlight"; - pwms = <&pwm2 0 50000>; + pwms = <&pwm2 0 50000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/dts/imx6dl-lanmcu.dts b/arch/arm/dts/imx6dl-lanmcu.dts index b05ed9c3ba..9f69d67a05 100644 --- a/arch/arm/dts/imx6dl-lanmcu.dts +++ b/arch/arm/dts/imx6dl-lanmcu.dts @@ -74,7 +74,7 @@ backlight_lcd: backlight_lcd { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 5 7 9 12 15 20 27 35 47 62 81 107 142 188 248 328 433 573 757 1000>; default-brightness-level = <20>; diff --git a/arch/arm/dts/imx6dl-prtvt7.dts b/arch/arm/dts/imx6dl-prtvt7.dts index c202e6786d..27daa3e15f 100644 --- a/arch/arm/dts/imx6dl-prtvt7.dts +++ b/arch/arm/dts/imx6dl-prtvt7.dts @@ -21,7 +21,7 @@ backlight_lcd: backlight-lcd { compatible = "pwm-backlight"; - pwms = <&pwm1 0 500000>; + pwms = <&pwm1 0 500000 0>; brightness-levels = <0 20 81 248 1000>; default-brightness-level = <20>; num-interpolated-steps = <21>; diff --git a/arch/arm/dts/imx6q-guf-santaro.dts b/arch/arm/dts/imx6q-guf-santaro.dts index a915348171..e72aacc59b 100644 --- a/arch/arm/dts/imx6q-guf-santaro.dts +++ b/arch/arm/dts/imx6q-guf-santaro.dts @@ -47,7 +47,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_backlight>; compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; power-supply = <®_backlight>; diff --git a/arch/arm/dts/imx6q-prti6q.dts b/arch/arm/dts/imx6q-prti6q.dts index 76bb4d53d3..89a23ef0c6 100644 --- a/arch/arm/dts/imx6q-prti6q.dts +++ b/arch/arm/dts/imx6q-prti6q.dts @@ -29,7 +29,7 @@ compatible = "pwm-backlight"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_backlight>; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 16 64 255>; num-interpolated-steps = <16>; default-brightness-level = <16>; diff --git a/arch/arm/dts/imx6qdl-mba6x.dtsi b/arch/arm/dts/imx6qdl-mba6x.dtsi index 216c3be7e8..9cc31491cc 100644 --- a/arch/arm/dts/imx6qdl-mba6x.dtsi +++ b/arch/arm/dts/imx6qdl-mba6x.dtsi @@ -38,7 +38,7 @@ beeper: beeper@0 { compatible = "pwm-beeper"; - pwms = <&pwm1 2 5000000>; + pwms = <&pwm1 2 5000000 0>; }; disp0: display@0 { diff --git a/arch/arm/dts/imx6qp-prtwd3.dts b/arch/arm/dts/imx6qp-prtwd3.dts index 0ef0bae036..97b25ee26a 100644 --- a/arch/arm/dts/imx6qp-prtwd3.dts +++ b/arch/arm/dts/imx6qp-prtwd3.dts @@ -97,7 +97,7 @@ backlight_lcd: backlight_lcd { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 1 2 4 6 8 12 16 24 32 48 64 96 128 192 255>; default-brightness-level = <15>; power-supply = <®_3v3>; @@ -105,7 +105,7 @@ backlight_panel1: backlight_panel1 { compatible = "pwm-backlight"; - pwms = <&pwm2 0 5000000>; + pwms = <&pwm2 0 5000000 0>; brightness-levels = <0 1 2 4 6 8 12 16 24 32 48 64 96 128 192 255>; default-brightness-level = <0>; power-supply = <®_3v3>; diff --git a/arch/arm/dts/imx7d-pba-c-09.dtsi b/arch/arm/dts/imx7d-pba-c-09.dtsi index 0b2a987fd4..ffe1239801 100644 --- a/arch/arm/dts/imx7d-pba-c-09.dtsi +++ b/arch/arm/dts/imx7d-pba-c-09.dtsi @@ -265,7 +265,7 @@ }; &backlight { - pwms = <&pwm3 0 5000000>; + pwms = <&pwm3 0 5000000 0>; enable-gpios = <&gpio1 1 0>; status = "disabled"; }; -- 2.28.0 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
