Enrico,
On 2020-09-30 10:09, Enrico Jörns wrote:
Hi Robin,
..
Why this would work anyway is because barebox extends the kernel
commandline with the root= entries required to boot the kernel from
that specific partition where it did read the entry from.
Re-reading this, do you mean that the blspec files on the rootfs
partitions
should contain a root=/dev/mmcblk* of the partition they are on? And
thus
still contain dynamic (install time computed) configuration?
I placed my kernel and bootspec entry in the rootfs partition under
/boot.
The rootfs partition is mmcblk2p5 (barebox: mmc2.4).
The 'boot' command doesn't work with target 'mmc2.4' (probably since I
placed
the data in a '/boot' subdirectory.
If I use 'boot /mnt/mmc2.4/boot' barebox finds the spec, kernel and dtb
but
my root= is not set in the kernel commandline.
Best regards,
Robin van der Gracht
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
