This way we end up with the fastest DDR speed when training is finished and don't need to rely on TF-A to switch into a higher DDR speed.
Signed-off-by: Lucas Stach <[email protected]> --- arch/arm/boards/nxp-imx8mm-evk/lpddr4-timing.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/boards/nxp-imx8mm-evk/lpddr4-timing.c b/arch/arm/boards/nxp-imx8mm-evk/lpddr4-timing.c index b164bdec07f1..33ef5542a364 100644 --- a/arch/arm/boards/nxp-imx8mm-evk/lpddr4-timing.c +++ b/arch/arm/boards/nxp-imx8mm-evk/lpddr4-timing.c @@ -118,7 +118,7 @@ static struct dram_cfg_param lpddr4_ddrc_cfg[] = { { DDRC_FREQ2_INIT7(0), 0x0006004a }, /* boot start point */ - { DDRC_MSTR2(0), 0x2 }, //DDRC_MSTR2 + { DDRC_MSTR2(0), 0x0 }, //DDRC_MSTR2 }; /* PHY Initialize Configuration */ @@ -1940,12 +1940,6 @@ static struct dram_fsp_msg lpddr4_dram_fsp_msg[] = { .fw_type = FW_1D_IMAGE, .fsp_cfg = lpddr4_fsp0_cfg, .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_cfg), - }, { - /* P0 3000mts 2D */ - .drate = 3000, - .fw_type = FW_2D_IMAGE, - .fsp_cfg = lpddr4_fsp0_2d_cfg, - .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_2d_cfg), }, { /* P1 400mts 1D */ .drate = 400, @@ -1958,6 +1952,12 @@ static struct dram_fsp_msg lpddr4_dram_fsp_msg[] = { .fw_type = FW_1D_IMAGE, .fsp_cfg = lpddr4_fsp2_cfg, .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp2_cfg), + }, { + /* P0 3000mts 2D */ + .drate = 3000, + .fw_type = FW_2D_IMAGE, + .fsp_cfg = lpddr4_fsp0_2d_cfg, + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_2d_cfg), }, }; -- 2.20.1 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
