Instead of just ignoring errors related to regulator getting error out. In case there is no regulator in the device tree, regulator_get() returns the dummy regulator and not an error code, so the change is right for this situation, too.
Signed-off-by: Uwe Kleine-König <[email protected]> --- drivers/usb/imx/chipidea-imx.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/imx/chipidea-imx.c b/drivers/usb/imx/chipidea-imx.c index 786beede6d89..dd0e3c1a2a58 100644 --- a/drivers/usb/imx/chipidea-imx.c +++ b/drivers/usb/imx/chipidea-imx.c @@ -267,8 +267,11 @@ static int imx_chipidea_probe(struct device_d *dev) } ci->vbus = regulator_get(dev, "vbus"); - if (IS_ERR(ci->vbus)) - ci->vbus = NULL; + if (IS_ERR(ci->vbus)) { + ret = ERR_PTR(ci->vbus); + dev_err(dev, "Cannot get vbus regulator: %s\n", strerror(-ret)); + return ret; + } /* * Some devices have more than one clock, in this case they are enabled -- 2.28.0 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
