We have a function for getting from the struct nand_chip * to the struct
mtd_info *, so use it.

Signed-off-by: Sascha Hauer <[email protected]>
---
 drivers/mtd/nand/nand_mrvl_nfc.c | 26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/nand/nand_mrvl_nfc.c b/drivers/mtd/nand/nand_mrvl_nfc.c
index 76b487c3f8..892ce507a5 100644
--- a/drivers/mtd/nand/nand_mrvl_nfc.c
+++ b/drivers/mtd/nand/nand_mrvl_nfc.c
@@ -419,9 +419,12 @@ static void mrvl_nand_select_chip(struct nand_chip *chip, 
int chipnr)
  */
 static unsigned int mrvl_datasize(struct mrvl_nand_host *host)
 {
+       struct nand_chip *chip = &host->chip;
+       struct mtd_info *mtd = nand_to_mtd(chip);
+
        unsigned int datasize;
 
-       datasize = host->chip.mtd.writesize;
+       datasize = mtd->writesize;
        if (host->use_spare) {
                datasize += host->spare_size;
                if (!host->use_ecc)
@@ -531,6 +534,9 @@ static void set_command_address(struct mrvl_nand_host *host,
 
 static void prepare_start_command(struct mrvl_nand_host *host, int command)
 {
+       struct nand_chip *chip = &host->chip;
+       struct mtd_info *mtd = nand_to_mtd(chip);
+
        /* reset data and oob column point to handle data */
        host->buf_start         = 0;
        host->buf_count         = 0;
@@ -573,7 +579,7 @@ static void prepare_start_command(struct mrvl_nand_host 
*host, int command)
        if (command == NAND_CMD_READ0 ||
            command == NAND_CMD_READOOB ||
            command == NAND_CMD_SEQIN) {
-               host->buf_count = host->chip.mtd.writesize + 
host->chip.mtd.oobsize;
+               host->buf_count = mtd->writesize + mtd->oobsize;
                memset(host->data_buff, 0xFF, host->buf_count);
        }
 
@@ -590,10 +596,10 @@ static void prepare_start_command(struct mrvl_nand_host 
*host, int command)
 static int prepare_set_command(struct mrvl_nand_host *host, int command,
                int ext_cmd_type, uint16_t column, int page_addr)
 {
+       struct nand_chip *chip = &host->chip;
+       struct mtd_info *mtd = nand_to_mtd(chip);
        int addr_cycle, exec_cmd;
-       struct mtd_info *mtd;
 
-       mtd = &host->chip.mtd;
        exec_cmd = 1;
 
        if (host->cs != 0)
@@ -880,7 +886,7 @@ static void mrvl_nand_write_buf(struct nand_chip *chip,
 static void mrvl_nand_config_flash(struct mrvl_nand_host *host)
 {
        struct nand_chip *chip = &host->chip;
-       struct mtd_info *mtd = &host->chip.mtd;
+       struct mtd_info *mtd = nand_to_mtd(chip);
        uint32_t ndcr = host->reg_ndcr;
 
        /* calculate flash information */
@@ -1117,7 +1123,7 @@ static struct mrvl_nand_host *alloc_nand_resource(struct 
device_d *dev)
        host = xzalloc(sizeof(*host));
        host->num_cs = 1;
        host->cs = 0;
-       mtd = &host->chip.mtd;
+       mtd = nand_to_mtd(&host->chip);
        mtd->dev.parent = dev;
        mtd->name = "mrvl_nand";
 
@@ -1204,6 +1210,8 @@ static int mrvl_nand_probe_dt(struct mrvl_nand_host *host)
 static int mrvl_nand_probe(struct device_d *dev)
 {
        struct mrvl_nand_host *host;
+       struct nand_chip *chip;
+       struct mtd_info *mtd;
        int ret;
 
        host = alloc_nand_resource(dev);
@@ -1216,8 +1224,10 @@ static int mrvl_nand_probe(struct device_d *dev)
        if (ret)
                return ret;
 
-       host->chip.controller = &host->chip.hwcontrol;
-       ret = mrvl_nand_scan(&host->chip);
+       chip = &host->chip;
+       mtd = nand_to_mtd(chip);
+
+       ret = mrvl_nand_scan(chip);
        if (ret) {
                dev_warn(dev, "failed to scan nand at cs %d\n",
                         host->cs);
-- 
2.20.1


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

Reply via email to