Hello,
On 11/13/20 9:51 AM, Alexander Shiyan wrote:
> Hello All.
>
> I am having problems updating the barebox from version 2019.02 to version
> 2020.10.
> The barebox i.MX6 CLK driver now uses several patches compared to the previous
> version to fix the err009219 bug, and the display no more works as before.
> I use a board based on i.MX6Q revision 1.2. With the old bootloader, the LVDS
> channel
> is initialized and I can display the splash screen in the barebox. After
> loading the kernel,
> everything works too.
> I added source selection for LVDS channels and the kernel works with these
> additions.
> &clks {
> assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
> <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
> assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
> <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
> };
>
> The splash screen in new version is not displayed in the barebox.
> So, the question, what I do incorrect and how to fix this?
> Old clk_dump:
> pll5_video (rate 716800008, enabled)
> pll5_post_div (rate 179200002, enabled)
> pll5_video_div (rate 44800001, enabled)
> ldb_di0_sel (rate 44800001, enabled)
> ldb_di0_div_3_5 (rate 12800000, enabled)
> ldb_di0_podf (rate 6400000, enabled)
> ipu1_di0_sel (rate 6400000, enabled)
> ipu1_di0 (rate 6400000, enabled)
> [email protected]_di0_pixel (rate
> 6400000, enabled)
44800001 / 6400000 = 7.00000015625
> ldb_di0 (rate 6400000, enabled)
> New:
> pll5_video (rate 716800008, enable_count: 1, unknown)
> pll5_post_div (rate 358400004, enable_count: 1, always enabled)
> pll5_video_div (rate 179200002, enable_count: 1, always enabled)
> ldb_di0_sel (rate 179200002, enable_count: 1, always enabled)
> ldb_di0_div_3_5 (rate 51200000, enable_count: 1, always
> enabled)
> ldb_di0_podf (rate 25600000, enable_count: 1, always
> enabled)
> ipu1_di0_sel (rate 25600000, enable_count: 1,
> always enabled)
> ipu1_di0 (rate 25600000, enable_count: 1,
> enabled)
> [email protected]_di0_pixel (rate
> 6400000, enable_count: 1, always enabled)
179200002 / 6400000 = 28.0000003125
Shouldn't both be a clean 7.0? Is it normal that your PLL5 couldn't be
configured
exactly to 716800000?
Does Linux /sys/kernel/debug/clk/clk_summary have the same frequencies?
For comparison, I've a 33MHz display with the
assigned-clock/assigned-clock-parents
snippet in the barebox device tree, but not in the kernel's and it works for me:
pll5_video (rate 924000000, enable_count: 1, unknown)
pll5_post_div (rate 462000000, enable_count: 1, always enabled)
pll5_video_div (rate 231000000, enable_count: 1, always enabled)
ldb_di0_sel (rate 231000000, enable_count: 1, always enabled)
ldb_di0_div_3_5 (rate 66000000, enable_count: 1, always enabled)
ldb_di0_podf (rate 33000000, enable_count: 2, always
enabled)
ipu1_di0_sel (rate 33000000, enable_count: 1, always
enabled)
ipu1_di0 (rate 33000000, enable_count: 1, enabled)
[email protected]_di0_pixel (rate
16500000, enable_count: 1, always enabled)
ipu2_di1_sel (rate 33000000, enable_count: 1, always
enabled)
ipu2_di1 (rate 33000000, enable_count: 1, enabled)
[email protected]_di1_pixel (rate
33000000, enable_count: 1, always enabled)
ldb_di0 (rate 33000000, enable_count: 0, enabled)
ldb_di1_sel (rate 231000000, enable_count: 0, always enabled)
ldb_di1_div_3_5 (rate 66000000, enable_count: 0, always enabled)
ldb_di1_podf (rate 33000000, enable_count: 0, always
enabled)
ldb_di1 (rate 33000000, enable_count: 0, enabled)
> ldb_di0 (rate 25600000, enable_count: 0, enabled)
>
> Can anyone help me to resolve this?
> Thanks!
>
> ---
> _______________________________________________
> barebox mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
