The Raspberry Pi Zero and Zero W have no power LED and lack the USB
hub and ethernet port. The rpi_b_plus_init is thus the wrong init function
to use. Add a new init function that just configures the activity LED
and configure the new exposed USB port for OTG.
While we have a dwc2 gadget driver, it doesn't yet work for the Rpi:
barebox@RaspberryPi Zero W:/ usbgadget -a
udc0: registering UDC driver [g_multi]
multi_bind: creating ACM function
g_multi usbgadget: Multifunction Composite Gadget
g_multi usbgadget: g_multi ready
dwc2 [email protected]: bound driver g_multi
WARNING: at drivers/usb/dwc2/gadget.c:1896/dwc2_gadget_pullup()!
But let's add dr_mode = otg anyway, so it can be debugged out of the box
with only config changes.
Signed-off-by: Ahmad Fatoum <[email protected]>
---
arch/arm/boards/raspberry-pi/rpi-common.c | 19 +++++++++++++++++--
arch/arm/dts/bcm2835-rpi.dts | 4 ++++
2 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c
b/arch/arm/boards/raspberry-pi/rpi-common.c
index 46c8ad6f52d9..dba68d17992f 100644
--- a/arch/arm/boards/raspberry-pi/rpi-common.c
+++ b/arch/arm/boards/raspberry-pi/rpi-common.c
@@ -113,6 +113,15 @@ static void rpi_set_usbethaddr(void)
eth_register_ethaddr(0, msg->get_mac_address.body.resp.mac);
}
+static void rpi_set_usbotg(const char *alias)
+{
+ struct device_node *usb;
+
+ usb = of_find_node_by_alias(NULL, alias);
+ if (usb)
+ of_property_write_string(usb, "dr_mode", "otg");
+}
+
static struct gpio_led rpi_leds[] = {
{
.gpio = -EINVAL,
@@ -158,6 +167,12 @@ static void rpi_b_plus_init(void)
rpi_set_usbethaddr();
}
+static void rpi_0_init(void)
+{
+ rpi_leds[0].gpio = 47;
+ rpi_set_usbotg("usb0");
+}
+
/* See comments in mbox.h for data source */
static const struct rpi_model rpi_models_old_scheme[] = {
RPI_MODEL(0, "Unknown model", NULL),
@@ -190,10 +205,10 @@ static const struct rpi_model rpi_models_new_scheme[] = {
RPI_MODEL(BCM2835_BOARD_REV_CM1, "Compute Module", NULL ),
RPI_MODEL(0x7, "Unknown model", NULL),
RPI_MODEL(BCM2837_BOARD_REV_3_B, "Model 3B", rpi_b_init ),
- RPI_MODEL(BCM2835_BOARD_REV_ZERO, "Zero",
rpi_b_plus_init),
+ RPI_MODEL(BCM2835_BOARD_REV_ZERO, "Zero", rpi_0_init),
RPI_MODEL(BCM2837_BOARD_REV_CM3, "Compute Module 3", NULL ),
RPI_MODEL(0xb, "Unknown model", NULL),
- RPI_MODEL(BCM2835_BOARD_REV_ZERO_W, "Zero W",
rpi_b_plus_init),
+ RPI_MODEL(BCM2835_BOARD_REV_ZERO_W, "Zero W", rpi_0_init),
RPI_MODEL(BCM2837B0_BOARD_REV_3B_PLUS, "Model 3 B+", rpi_b_plus_init
),
RPI_MODEL(BCM2837B0_BOARD_REV_3A_PLUS, "Nodel 3 A+",
rpi_b_plus_init),
RPI_MODEL(0xf, "Unknown model", NULL),
diff --git a/arch/arm/dts/bcm2835-rpi.dts b/arch/arm/dts/bcm2835-rpi.dts
index 121edebdb3a0..8d352a457da6 100644
--- a/arch/arm/dts/bcm2835-rpi.dts
+++ b/arch/arm/dts/bcm2835-rpi.dts
@@ -1,5 +1,9 @@
#include <arm/bcm2835-rpi-a.dts>
+&{/aliases} {
+ usb0 = &usb;
+};
+
&{/memory@0} {
reg = <0x0 0x0>;
};
--
2.28.0
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
