On Thu, Feb 25, 2021 at 11:46:17AM +0100, Ahmad Fatoum wrote:
> usb_stor_read_capacity uses SCSI Read Capacity 10, which assumes
> capacity never exceeds 32-bit, which equals 2TiB max capacity at
> 512 byte sector size.
>
> In preparation for porting support for SCSI Read Capacity 16 from
> Linux, move over all Read Capacity 10 related code into a single
> function. Some more refactoring is done to make the function look
> more like the Linux implementation. This also makes it easier to spot
> the differences in retry/timeout handling, which we might want to
> adopt in future.
>
> No functional change intended.
>
> Signed-off-by: Ahmad Fatoum <[email protected]>
> ---
> drivers/usb/storage/usb.c | 62 +++++++++++++++++++++------------------
> 1 file changed, 33 insertions(+), 29 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
> index c264dd4b71e2..122af659820f 100644
> --- a/drivers/usb/storage/usb.c
> +++ b/drivers/usb/storage/usb.c
> @@ -157,31 +157,49 @@ static int usb_stor_test_unit_ready(struct us_blk_dev
> *usb_blkdev)
> return 0;
> }
>
> -static int usb_stor_read_capacity(struct us_blk_dev *usb_blkdev,
> - u32 *last_lba, u32 *block_length)
> +static int read_capacity_10(struct us_blk_dev *usb_blkdev)
> {
> struct device_d *dev = &usb_blkdev->us->pusb_dev->dev;
> + unsigned char cmd[16];
> const u32 datalen = 8;
> - u32 *data = xzalloc(datalen);
> - u8 cmd[10];
> + __be32 *data = xzalloc(datalen);
> int ret;
> + sector_t lba;
> + unsigned sector_size;
>
> memset(cmd, 0, sizeof(cmd));
> cmd[0] = SCSI_RD_CAPAC;
>
> ret = usb_stor_transport(usb_blkdev, cmd, sizeof(cmd), data, datalen,
> 3, USB_STOR_NO_REQUEST_SENSE);
> - if (ret < 0)
> - goto exit;
>
> - dev_dbg(dev, "Read Capacity returns: 0x%x, 0x%x\n",
> - data[0], data[1]);
> - *last_lba = be32_to_cpu(data[0]);
> - *block_length = be32_to_cpu(data[1]);
> + if (ret < 0) {
> + dev_dbg(dev, "Cannot read device capacity\n");
> + return ret;
> + }
>
> -exit:
> - free(data);
> - return ret;
> + sector_size = be32_to_cpu(data[1]);
> + lba = be32_to_cpu(data[0]);
> +
> + dev_dbg(dev, "LBA (10) = 0x%llx w/ sector size = %u\n",
> + lba, sector_size);
> +
> +
> + if (lba == U32_MAX) {
> + lba = U32_MAX - 1;
> + dev_warn(dev,
> + "Limiting device size due to 32 bit constraints\n");
> + /* To support LBA >= U32_MAX, a READ CAPACITY (16) should be
> issued instead */
> + }
> +
> +
> + if (sector_size != SECTOR_SIZE)
> + dev_warn(dev, "Support only %d bytes sectors\n", SECTOR_SIZE);
> +
> + usb_blkdev->blk.num_blocks = lba + 1;
> + usb_blkdev->blk.blockbits = SECTOR_SHIFT;
> +
> + return SECTOR_SIZE;
> }
>
> static int usb_stor_io_10(struct us_blk_dev *usb_blkdev, u8 opcode,
> @@ -275,7 +293,6 @@ static int usb_stor_init_blkdev(struct us_blk_dev
> *pblk_dev)
> {
> struct us_data *us = pblk_dev->us;
> struct device_d *dev = &us->pusb_dev->dev;
> - u32 last_lba = 0, block_length = 0;
> int result;
>
> /* get device info */
> @@ -299,23 +316,10 @@ static int usb_stor_init_blkdev(struct us_blk_dev
> *pblk_dev)
> /* read capacity */
> dev_dbg(dev, "Reading capacity\n");
>
> - result = usb_stor_read_capacity(pblk_dev, &last_lba, &block_length);
> - if (result < 0) {
> - dev_dbg(dev, "Cannot read device capacity\n");
> + result = read_capacity_10(pblk_dev);
> + if (result < 0)
> return result;
> - }
> -
> - if (last_lba == U32_MAX) {
> - last_lba = U32_MAX - 1;
> - dev_warn(dev,
> - "Limiting device size due to 32 bit constraints\n");
> - /* To support LBA >= U32_MAX, a READ CAPACITY (16) should be
> issued here */
> - }
>
> - pblk_dev->blk.num_blocks = last_lba + 1;
> - if (block_length != SECTOR_SIZE)
> - pr_warn("Support only %d bytes sectors\n", SECTOR_SIZE);
> - pblk_dev->blk.blockbits = SECTOR_SHIFT;
> dev_dbg(dev, "Capacity = 0x%llx, blockshift = 0x%x\n",
> pblk_dev->blk.num_blocks, pblk_dev->blk.blockbits);
>
> --
> 2.29.2
>
>
> _______________________________________________
> barebox mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
