From: Thomas Haemmerle <thomas.haemme...@wolfvision.net>

Read link status information in dp83867 specific register instead of
using `genphy_read_status()`.

In case of a link downshift, `genphy_read_status()` can return
`SPEED_1000` even if the negotiated speed is 100 Mbit.

A downshift can happen, if both link-partners are gigabit-capable, but
the connection supports only 100 MBit, for example because of a 100 MBit
PoE injector that connects only 2 of the 4 twisted pairs.

Signed-off-by: Thomas Haemmerle <thomas.haemme...@wolfvision.net>
Signed-off-by: Michael Tretter <m.tret...@pengutronix.de>
---
 drivers/net/phy/dp83867.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index dd769b4d3e38..c19f6ecba267 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -16,6 +16,7 @@
 #define DP83867_DEVADDR                MDIO_MMD_VEND2
 
 #define MII_DP83867_PHYCTRL    0x10
+#define MII_DP83867_PHYSTS     0x11
 #define MII_DP83867_MICR       0x12
 #define MII_DP83867_ISR                0x13
 #define MII_DP83867_CFG2       0x14
@@ -65,6 +66,11 @@
 #define DP83867_PHYCTRL_TXFIFO_SHIFT           14
 #define DP83867_PHYCR_RESERVED_MASK            BIT(11)
 
+/* PHY STS bits */
+#define DP83867_PHYSTS_SPEED_1000              BIT(15)
+#define DP83867_PHYSTS_SPEED_100               BIT(14)
+#define DP83867_PHYSTS_DUPLEX_FULL             BIT(13)
+
 /* RGMIIDCTL bits */
 #define DP83867_RGMII_TX_CLK_DELAY_SHIFT       4
 
@@ -109,6 +115,35 @@ struct dp83867_private {
        bool rxctrl_strap_quirk;
 };
 
+static int dp83867_read_status(struct phy_device *phydev)
+{
+       int status;
+       int ret;
+
+       ret = genphy_update_link(phydev);
+       if (ret)
+               return ret;
+
+       status = phy_read(phydev, MII_DP83867_PHYSTS);
+       if (status < 0)
+               return status;
+
+       phydev->speed = SPEED_10;
+       phydev->duplex = DUPLEX_HALF;
+
+       if (status & DP83867_PHYSTS_SPEED_1000)
+               phydev->speed = SPEED_1000;
+       else if (status & DP83867_PHYSTS_SPEED_100)
+               phydev->speed = SPEED_100;
+
+       if (status & DP83867_PHYSTS_DUPLEX_FULL)
+               phydev->duplex = DUPLEX_FULL;
+
+       phydev->pause = phydev->asym_pause = 0;
+
+       return 0;
+}
+
 static int dp83867_config_port_mirroring(struct phy_device *phydev)
 {
        struct dp83867_private *dp83867 = phydev->priv;
@@ -279,6 +314,7 @@ static struct phy_driver dp83867_driver[] = {
                .drv.name = "TI DP83867",
                .features = PHY_GBIT_FEATURES,
                .config_init = dp83867_config_init,
+               .read_status = dp83867_read_status,
        },
 };
 
-- 
2.29.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Reply via email to