Hi,
On Wed, Apr 14, 2021 at 12:37 AM Ahmad Fatoum <[email protected]> wrote:
>
> There is more documentation besides the README. For networking see
> https://barebox.org/doc/latest/user/networking.html
Thank you for the documentation. I read them and configured the values
but it is not working, so it may be possible that I am not doing it
correctly.
> The default barebox boot target is to net boot. It'll try to get
> a DHCP address and then load some predefined files over TFTP
> (If it fails, it'll tell you which ones).
>
> If that didn't work, you'll need to tell more about your setup?
> What board are you using barebox on?
Thank you for the information. At present, I haven't tried it on any
board as I am using it as Sandbox but I have BeagleBone Black and
Raspberry Pi 3B.
> Part of the question reads like you are using it while Linux is
> running (sandbox) and some other like you'd run it directly as
> bootloader. Also what kind of errors do you get, can you copy them here?
Yes, I am trying to execute it as Sandbox and while executing through
sudo please find the information given below:
sudo ./barebox
add stickypage initially unbacked by file
barebox 2021.04.0-00056-gaf0f068a6 #1 Fri Apr 16 23:11:01 IST 2021
Board: Sandbox
console: registered as cs0
netconsole: registered as netconsole-1
hostfile 7f455b09a000.stickypage.of: registered as character device
sandbox-watchdog watchdog.of: probed
malloc space: 0x7f4559e21010 -> 0x7f455ae2100f (size 16 MiB)
state: New state registered 'state'
ERROR: state: No meta data header found
ERROR: state: No meta data header found
ERROR: state: No meta data header found
ERROR: state: Failed to find any valid state copy in any bucket
ERROR: state: Failed to read state with format raw, -2
WARNING: state state.of: Failed to load persistent state, continuing
with defaults, -2
super: JFFS version 2.2. © 2001-2006 Red Hat, Inc.
envfs: no envfs (magic mismatch) - envfs never written?
*******************************************************
*** Inconsistent barebox state buckets detected ***
*** This is normal for a first boot ***
*** barebox will repair them on next poweroff/reset ***
*******************************************************
barebox@Sandbox:/ ping google.com
ERROR: dns: no nameserver specified in $net.nameserver
ping failed: No route to host
barebox@Sandbox:/ dhcp
WARNING: eth0: No MAC address set. Using random address 9e:47:e0:0b:cb:ab
T T T T T T T T T T T T T T T T T T T T dhcp: Connection timed out
barebox@Sandbox:/ ping google.com
ERROR: dns: no nameserver specified in $net.nameserver
ping failed: No route to host
barebox@Sandbox:/
barebox@Sandbox:/ devinfo
`-- global
`-- nv
`-- platform
`-- machine
`-- state.of
`-- 7f455b09a000.stickypage.of
`-- 0x00000000-0x00000fff ( 4 KiB): /dev/stickypage
`-- 0x00000400-0x00000bff ( 2 KiB): /dev/stickypage.env
`-- 0x00000c00-0x00000fff ( 1 KiB): /dev/stickypage.state
`-- bmode
`-- 7f455b09a000.stickypage:partitions.of
`-- power.of
`-- watchdog.of
`-- wdog0
`-- sound.of
`-- led.of
`-- console0
`-- cs0
`-- 0x00000000-0xffffffffffffffff ( 0 Bytes): /dev/cs0
`-- mem0
`-- 0x00000000-0xffffffffffffffff ( 0 Bytes): /dev/mem
`-- netconsole
`-- 0x00000000-0xffffffffffffffff ( 0 Bytes): /dev/netconsole-1
`-- tap0
`-- eth0
`-- sdlfb0
`-- devrandom0
`-- chosen:environment.of
`-- spi
`-- i2c
`-- fs
`-- ramfs0
`-- devfs0
`-- pstore0
`-- state
barebox@Sandbox:/
I am doing ping but it doesn't have any dns entry and route to resolve it.
Please let me know for any other information.
Thanks and regards,
Neeraj
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
