Hey Lucas,
> Seems you imported this patch from somewhere and it left some traces in
> the commit message?
yes, sorry, my local mirror. I will fix that.
> Also I don't understand what this change is supposed to be doing. You
> are building just another Barebox binary, with no real differences in
> the configuration. I would much prefer a proper 2-stage loading in the
> PBL, but that requires FAT support for the SDcard boot, which I didn't
> get around to take a look at yet.
Of course, one would need a seperate configuration file. I'm using
"zynq_fsbl_defconfig" for the small one and "zynq_defconfig" for the bigger one
for my own tests.
I'm currently booting from SDcard and i have not realised any problems with the
FAT support so far. But with the arasan-sdhci driver when writing, see my patch
below which fixes it for me but I haven't dived into the drivers very deeply
yet.
best regards
Michael
drivers/mci/arasan-sdhci.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/mci/arasan-sdhci.c b/drivers/mci/arasan-sdhci.c
index 520bf30ff..669675369 100644
--- a/drivers/mci/arasan-sdhci.c
+++ b/drivers/mci/arasan-sdhci.c
@@ -265,7 +265,7 @@ static int arasan_sdhci_send_cmd(struct mci_host *mci,
struct mci_cmd *cmd,
if (cmd->cmdidx != MMC_CMD_STOP_TRANSMISSION)
mask |= SDHCI_CMD_INHIBIT_DATA;
- ret = wait_on_timeout(10 * MSECOND,
+ ret = wait_on_timeout(100 * MSECOND,
!(sdhci_read32(&host->sdhci, SDHCI_PRESENT_STATE) &
mask));
if (ret) {
@@ -277,8 +277,6 @@ static int arasan_sdhci_send_cmd(struct mci_host *mci,
struct mci_cmd *cmd,
sdhci_write32(&host->sdhci, SDHCI_INT_STATUS, ~0);
mask = SDHCI_INT_CMD_COMPLETE;
- if (data)
- mask |= SDHCI_INT_DATA_AVAIL;
sdhci_set_cmd_xfer_mode(&host->sdhci, cmd, data, false, &command,
&xfer);
--
2.25.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
