If on-die termination is enabled, the RXC pin of iMX6 will be pulled high. Since we already have an 10K pull-down on board, the RXC level on PHY reset will be ~800mV, which is mostly interpreted as 1. On some reboots we get 0 instead and kernel can't detect the PHY properly.
Since the default 0x020e07ac value is 0, it is sufficient to remove this entry from the affected imxcfg files. Since we get stable 0 on pin PHYADDR[2], the PHY address is changed from 4 to 0. Reported-by: Robin van der Gracht <[email protected]> Fixes: 00adc1e33ef8 ("ARM: add imx6 based Protonic boads") Signed-off-by: Oleksij Rempel <[email protected]> --- arch/arm/boards/protonic-imx6/flash-header-vicut1.imxcfg | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boards/protonic-imx6/flash-header-vicut1.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-vicut1.imxcfg index 9926fbf4a2..54f655c4c2 100644 --- a/arch/arm/boards/protonic-imx6/flash-header-vicut1.imxcfg +++ b/arch/arm/boards/protonic-imx6/flash-header-vicut1.imxcfg @@ -114,7 +114,6 @@ wm 32 0x020e001c 0x007f007f /* RGMII config */ wm 32 0x020e0768 0x00080000 /* 1V2 DDR IO */ -wm 32 0x020e0788 0x00000200 /* 60 Ohm ODT */ /* Debug */ wm 32 0x020e023c 0x00000005 -- 2.29.2 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
