I received a NXP LS1046A-RDB I built barebox for the LS1046A and got the image barebox-ls1046ardb-qspi.image. I programmed the image in the alternative SPI bank as per NXP instructions: => tftp $load_addr => sf erase 0 +$filesize && sf write $load_addr 0 $filesize
Barebox does not boot. I did notice that u-boot is at address 0x40100000 while the RCW is at 0x40000000. My understanding is that barebox is one image and shall be programmed at offset 0 of the SPI (0x40000000) At present I cannot connect my I.C.E. due a pin stuck in my MIPI connector. Any return on experience is welcome. Cheers, Renaud _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
