Hello,
On 21.06.2021 10:07, Ahmad Fatoum wrote:
On 06.06.21 14:23, Oleksij Rempel wrote:
Add state flags for each registered device and set error state on each
dev_err print.
This states can be used by users to identify erroneous device.
I thought this over a bit. We have dev_err calls when:
- probes are permanently deferred
- have actual probe (!= -ENODEV, != -ENXIO, != -EPROBE_DEFER)
- after probe something fails (e.g. you got the regulator, but couldn't
enable it)
So, I think the hook point is appropriate. Board code could extend this
and get a device and do some extra tests and use dev_set_err as appropriate.
So feel free to add:
Acked-by: Ahmad Fatoum <a.fat...@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rem...@pengutronix.de>
---
include/driver.h | 13 +++++++++++++
include/printk.h | 5 ++++-
2 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/include/driver.h b/include/driver.h
index d84fe35d50..b64a8e258c 100644
--- a/include/driver.h
+++ b/include/driver.h
@@ -88,6 +88,9 @@ struct device_d {
* when the driver should actually detect client devices
*/
int (*detect) (struct device_d *);
+
+#define DEV_ERR BIT(0)
+ u32 run_flags;
Just turn it into a bit field instead?
};
/** @brief Describes a driver present in the system */
@@ -361,6 +364,16 @@ static inline int dev_close_default(struct device_d *dev,
struct filep *f)
return 0;
}
+static inline void dev_set_err(struct device_d *dev)
+{
+ dev->run_flags |= DEV_ERR;
+}
+
+static inline bool dev_have_err(struct device_d *dev)
+{
+ return !!(dev->run_flags & DEV_ERR);
Isn't return dev->run_flags & DEV_ERR enough here?
Best
Bartek
+}
+
struct bus_type {
char *name;
int (*match)(struct device_d *dev, struct driver_d *drv);
diff --git a/include/printk.h b/include/printk.h
index f83ad3bf07..6c563be3e6 100644
--- a/include/printk.h
+++ b/include/printk.h
@@ -61,7 +61,10 @@ static inline int pr_print(int level, const char *format,
...)
#define dev_crit(dev, format, arg...) \
__dev_printf(2, (dev) , format , ## arg)
#define dev_err(dev, format, arg...) \
- __dev_printf(3, (dev) , format , ## arg)
+ ({ \
You're already using statement expressions, so you could add a
struct device_d *__dev = (dev);
here and use that.
+ dev_set_err(dev); \
+ __dev_printf(3, (dev) , format , ## arg); \
+ })
#define dev_warn(dev, format, arg...) \
__dev_printf(4, (dev) , format , ## arg)
#define dev_notice(dev, format, arg...) \
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
