On Wed, Sep 28, 2022 at 10:50:52AM +0200, Ahmad Fatoum wrote:
> While the upstream Linux driver doesn't support regulator configuration
> for the AXP152, we may need this in barebox for initial regulator setup.
> Thus have the MFD driver register the appropriate child device as done
> for the other drivers. While at it, pass along the axp20x driver data
> object. This is needed, so the regulator driver can query the variant;
> so far it was only possible to retrieve the parent regmap and redo the
> revision readout.
>
> Signed-off-by: Johannes Zink <[email protected]>
> Signed-off-by: Ahmad Fatoum <[email protected]>
> ---
> drivers/mfd/axp20x.c | 5 +++++
> 1 file changed, 5 insertions(+)
Applied, thanks
Sascha
>
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index da1e8ce35a7d..0a53eaea7cfa 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -141,6 +141,9 @@ static const struct mfd_cell axp152_cells[] = {
> {
> .name = "axp20x-pek",
> },
> + {
> + .name = "axp20x-regulator",
> + },
> };
>
> static const struct mfd_cell axp288_cells[] = {
> @@ -337,6 +340,8 @@ int axp20x_device_probe(struct axp20x_dev *axp20x)
> AXP806_REG_ADDR_EXT_ADDR_SLAVE_MODE);
> }
>
> + axp20x->dev->priv = axp20x;
> +
> ret = mfd_add_devices(axp20x->dev, axp20x->cells, axp20x->nr_cells);
> if (ret)
> return dev_err_probe(axp20x->dev, ret, "failed to add MFD
> devices\n");
> --
> 2.30.2
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
