This adds the register definitions for the AXP313A PMIC to the AXP20X mfd driver.
Signed-off-by: Wei Chen <[email protected]> Signed-off-by: Johannes Zink <[email protected]> --- drivers/mfd/axp20x-i2c.c | 1 + drivers/mfd/axp20x.c | 21 ++++++++++++++++++++- include/linux/mfd/axp20x.h | 28 ++++++++++++++++++++++++++++ 3 files changed, 49 insertions(+), 1 deletion(-) diff --git a/drivers/mfd/axp20x-i2c.c b/drivers/mfd/axp20x-i2c.c index d0f6a0f394..d1bb96e735 100644 --- a/drivers/mfd/axp20x-i2c.c +++ b/drivers/mfd/axp20x-i2c.c @@ -51,6 +51,7 @@ static const struct of_device_id axp20x_i2c_of_match[] = { { .compatible = "x-powers,axp152", .data = (void *)AXP152_ID }, { .compatible = "x-powers,axp202", .data = (void *)AXP202_ID }, { .compatible = "x-powers,axp209", .data = (void *)AXP209_ID }, + { .compatible = "x-powers,axp313a", .data = (void *)AXP313A_ID }, { .compatible = "x-powers,axp221", .data = (void *)AXP221_ID }, { .compatible = "x-powers,axp223", .data = (void *)AXP223_ID }, { .compatible = "x-powers,axp803", .data = (void *)AXP803_ID }, diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index 8d9de59e7d..62df91ff01 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -38,6 +38,7 @@ static const char * const axp20x_model_names[] = { "AXP221", "AXP223", "AXP288", + "AXP313A", "AXP803", "AXP806", "AXP809", @@ -68,6 +69,12 @@ static const struct regmap_config axp288_regmap_config = { .max_register = AXP288_FG_TUNE5, }; +static const struct regmap_config axp313a_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = AXP313A_POK_CONTROL, +}; + static const struct regmap_config axp806_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -160,6 +167,13 @@ static const struct mfd_cell axp288_cells[] = { }, }; +static const struct mfd_cell axp313a_cells[] = { + { + .name = "axp313a-regulator" + }, +}; + + static const struct mfd_cell axp803_cells[] = { { .name = "axp221-pek", @@ -271,6 +285,11 @@ int axp20x_match_device(struct axp20x_dev *axp20x) axp20x->nr_cells = ARRAY_SIZE(axp288_cells); axp20x->regmap_cfg = &axp288_regmap_config; break; + case AXP313A_ID: + axp20x->cells = axp313a_cells; + axp20x->nr_cells = ARRAY_SIZE(axp313a_cells); + axp20x->regmap_cfg = &axp313a_regmap_config; + break; case AXP803_ID: axp20x->nr_cells = ARRAY_SIZE(axp803_cells); axp20x->cells = axp803_cells; @@ -351,7 +370,7 @@ int axp20x_device_probe(struct axp20x_dev *axp20x) axp20x->poweroff.poweroff = axp20x_power_off; axp20x->poweroff.priority = 200; - if (axp20x->variant != AXP288_ID) + if (!(axp20x->variant == AXP288_ID) || (axp20x->variant == AXP313A_ID)) poweroff_handler_register(&axp20x->poweroff); return 0; diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index 5e068eb6ba..150ff063b8 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -18,6 +18,7 @@ enum axp20x_variants { AXP221_ID, AXP223_ID, AXP288_ID, + AXP313A_ID, AXP803_ID, AXP806_ID, AXP809_ID, @@ -287,6 +288,24 @@ enum axp20x_variants { #define AXP288_FG_TUNE4 0xec #define AXP288_FG_TUNE5 0xed +#define AXP313A_ON_INDICATE 0x00 +#define AXP313A_OFF_INDICATE 0x01 +#define AXP313A_IC_TYPE 0x03 +#define AXP313A_OUTPUT_CONTROL 0x10 +#define AXP313A_DCDC_DVM_PWM 0x12 +#define AXP313A_DCDC1_CONTROL 0x13 +#define AXP313A_DCDC2_CONTROL 0x14 +#define AXP313A_DCDC3_CONTROL 0x15 +#define AXP313A_ALDO1_CONTROL 0x16 +#define AXP313A_DLDO1_CONTROL 0x17 +#define AXP313A_POWER_STATUS 0x1A +#define AXP313A_PWROK_SET 0x1B +#define AXP313A_WAKEUP_CONRTOL 0x1C +#define AXP313A_OUTOUT_MONITOR 0x1D +#define AXP313A_POK_CONTROL 0x1E +#define AXP313A_IRQ_ENABLE1 0x20 +#define AXP313A_IRQ_STATUS1 0x21 + /* Regulators IDs */ enum { AXP20X_LDO1 = 0, @@ -323,6 +342,15 @@ enum { AXP22X_REG_ID_MAX, }; +enum { + AXP313A_DCDC1 = 0, + AXP313A_DCDC2, + AXP313A_DCDC3, + AXP313A_LDO1, /* RTCLDO */ + AXP313A_LDO2, /* RTCLDO1 */ + AXP313A_REG_ID_MAX, +}; + enum { AXP806_DCDCA = 0, AXP806_DCDCB, -- 2.30.2
