On Tue, Jan 03, 2023 at 11:03:17PM +0100, Ahmad Fatoum wrote:
> Usual procedure when calling the detect callback of a MCI host driver is
> to assume the connected card is a SD-Card and on timeout, treat it as
> MMC instead. The Arasan driver failed to do this properly leading to the
> need to specify no-sd to get eMMCs working. This is because the driver
> only handled software timeouts gracefully: The MCI host itself may also
> report timeout and it should not be treated as an error and instead
> should be silently passed along as -ETIMEDOUT, so the MCI core can check
> against it and fall back to eMMC after a failed probe for SD.
> 
> Reported-by: Michael Graichen <[email protected]>
> Reported-by: Steffen Trumtrar <[email protected]>
> Cc: Yann Sionneau <[email protected]>
> Signed-off-by: Ahmad Fatoum <[email protected]>
> ---
>  drivers/mci/arasan-sdhci.c | 24 +++++++++++++-----------
>  1 file changed, 13 insertions(+), 11 deletions(-)

Applied, thanks

Sascha

> 
> diff --git a/drivers/mci/arasan-sdhci.c b/drivers/mci/arasan-sdhci.c
> index 22389503becf..00a8ceed6836 100644
> --- a/drivers/mci/arasan-sdhci.c
> +++ b/drivers/mci/arasan-sdhci.c
> @@ -136,16 +136,17 @@ static void arasan_sdhci_set_ios(struct mci_host *mci, 
> struct mci_ios *ios)
>  static int arasan_sdhci_wait_for_done(struct arasan_sdhci_host *host, u32 
> mask)
>  {
>       u64 start = get_time_ns();
> -     u16 stat;
> -     u16 error;
> +     u32 stat;
>  
>       do {
> -             stat = sdhci_read16(&host->sdhci, SDHCI_INT_NORMAL_STATUS);
> +             stat = sdhci_read32(&host->sdhci, SDHCI_INT_STATUS);
> +
> +             if (stat & SDHCI_INT_TIMEOUT)
> +                     return -ETIMEDOUT;
> +
>               if (stat & SDHCI_INT_ERROR) {
> -                     error = sdhci_read16(&host->sdhci,
> -                                          SDHCI_INT_ERROR_STATUS);
>                       dev_err(host->mci.hw_dev, "SDHCI_INT_ERROR: 0x%08x\n",
> -                             error);
> +                             stat);
>                       return -EPERM;
>               }
>  
> @@ -159,8 +160,11 @@ static int arasan_sdhci_wait_for_done(struct 
> arasan_sdhci_host *host, u32 mask)
>       return 0;
>  }
>  
> -static void print_error(struct arasan_sdhci_host *host, int cmdidx)
> +static void print_error(struct arasan_sdhci_host *host, int cmdidx, int ret)
>  {
> +     if (ret == -ETIMEDOUT)
> +             return;
> +
>       dev_err(host->mci.hw_dev,
>               "error while transferring data for command %d\n", cmdidx);
>       dev_err(host->mci.hw_dev, "state = 0x%08x , interrupt = 0x%08x\n",
> @@ -210,10 +214,8 @@ static int arasan_sdhci_send_cmd(struct mci_host *mci, 
> struct mci_cmd *cmd,
>       sdhci_write16(&host->sdhci, SDHCI_COMMAND, command);
>  
>       ret = arasan_sdhci_wait_for_done(host, mask);
> -     if (ret == -EPERM)
> +     if (ret)
>               goto error;
> -     else if (ret)
> -             return ret;
>  
>       sdhci_read_response(&host->sdhci, cmd);
>       sdhci_write32(&host->sdhci, SDHCI_INT_STATUS, mask);
> @@ -223,7 +225,7 @@ static int arasan_sdhci_send_cmd(struct mci_host *mci, 
> struct mci_cmd *cmd,
>  
>  error:
>       if (ret) {
> -             print_error(host, cmd->cmdidx);
> +             print_error(host, cmd->cmdidx, ret);
>               arasan_sdhci_reset(host, BIT(1)); // SDHCI_RESET_CMD
>               arasan_sdhci_reset(host, BIT(2)); // SDHCI_RESET_DATA
>       }
> -- 
> 2.38.1
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Reply via email to