On Mon, Feb 06, 2023 at 09:59:28PM +0100, Lucas Stach wrote:
> The Linux kernel or whatever is started from Barebox might switch the
> ARM frequency to OD level, without first reprogramming the PMIC as
> required. This might lead to system instability. To avoid this,
> increase VDD_ARM to OD level. When the kernel handles the PMIC properly
> it will drop the voltage back to ND level when appropriate.
>
> Signed-off-by: Lucas Stach <[email protected]>
> ---
> arch/arm/boards/nxp-imx8mp-evk/lowlevel.c | 6 ++++++
> 1 file changed, 6 insertions(+)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/boards/nxp-imx8mp-evk/lowlevel.c
> b/arch/arm/boards/nxp-imx8mp-evk/lowlevel.c
> index 3cb24df1ca3f..d6fc32e65b61 100644
> --- a/arch/arm/boards/nxp-imx8mp-evk/lowlevel.c
> +++ b/arch/arm/boards/nxp-imx8mp-evk/lowlevel.c
> @@ -61,6 +61,12 @@ static struct pmic_config pca9450_cfg[] = {
> { PCA9450_BUCK1OUT_DVS0, 0x1C },
> { PCA9450_BUCK1OUT_DVS1, 0x14 },
> { PCA9450_BUCK1CTRL, 0x59 },
> + /*
> + * Increase VDD_ARM to 0.95V to avoid issues in case software after
> + * Barebox switches to the OD ARM frequency without reprogramming the
> + * PMIC first.
> + */
> + { PCA9450_BUCK2OUT_DVS0, 0x1C },
> /* set WDOG_B_CFG to cold reset */
> { PCA9450_RESET_CTRL, 0xA1 },
> };
> --
> 2.39.1
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
