Some commands are expected to return errors, for example when a non SDIO card is tested for being an SDIO card. Lower the priority of these error messages to dev_dbg().
Signed-off-by: Sascha Hauer <[email protected]> --- drivers/mci/rockchip-dwcmshc-sdhci.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mci/rockchip-dwcmshc-sdhci.c b/drivers/mci/rockchip-dwcmshc-sdhci.c index 87cbe9836c..4b4e8b7bd6 100644 --- a/drivers/mci/rockchip-dwcmshc-sdhci.c +++ b/drivers/mci/rockchip-dwcmshc-sdhci.c @@ -224,7 +224,7 @@ static int rk_sdhci_wait_for_done(struct rk_sdhci_host *host, u32 mask) do { stat = sdhci_read16(&host->sdhci, SDHCI_INT_NORMAL_STATUS); if (stat & SDHCI_INT_ERROR) { - dev_err(host->mci.hw_dev, "SDHCI_INT_ERROR: 0x%08x\n", + dev_dbg(host->mci.hw_dev, "SDHCI_INT_ERROR: 0x%08x\n", sdhci_read16(&host->sdhci, SDHCI_INT_ERROR_STATUS)); return -EPERM; } @@ -241,9 +241,9 @@ static int rk_sdhci_wait_for_done(struct rk_sdhci_host *host, u32 mask) static void print_error(struct rk_sdhci_host *host, int cmdidx) { - dev_err(host->mci.hw_dev, + dev_dbg(host->mci.hw_dev, "error while transfering data for command %d\n", cmdidx); - dev_err(host->mci.hw_dev, "state = 0x%08x , interrupt = 0x%08x\n", + dev_dbg(host->mci.hw_dev, "state = 0x%08x , interrupt = 0x%08x\n", sdhci_read32(&host->sdhci, SDHCI_PRESENT_STATE), sdhci_read32(&host->sdhci, SDHCI_INT_NORMAL_STATUS)); } -- 2.30.2
