Hi Sascha,
On 23-03-02, Sascha Hauer wrote:
> Some nodes have a unit name, but no reg property. Drop the unit name
> to avoid dtc warnings.
>
> Signed-off-by: Sascha Hauer <[email protected]>
> ---
> arch/arm/dts/imx7d-peb-eval-02.dtsi | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/dts/imx7d-peb-eval-02.dtsi
> b/arch/arm/dts/imx7d-peb-eval-02.dtsi
> index 8bde5b13e7..5c2c302d54 100644
> --- a/arch/arm/dts/imx7d-peb-eval-02.dtsi
> +++ b/arch/arm/dts/imx7d-peb-eval-02.dtsi
> @@ -13,21 +13,21 @@
> pinctrl-0 = <&pinctrl_leds_eval>;
> status = "disabled";
>
> - led@0 {
> + led0 {
To follow the binding doc the name should be led-0. For the below nodes
as well.
Regards,
Marco
> label = "eval_led_1";
> gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "gpio";
> default-state = "on";
> };
>
> - led@1 {
> + led1 {
> label = "eval_led_2";
> gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "gpio";
> default-state = "on";
> };
>
> - led@2 {
> + led2 {
> label = "eval_led_3";
> gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "gpio";
> @@ -41,18 +41,18 @@
> pinctrl-0 = <&pinctrl_btns_eval>;
> status = "disabled";
>
> - userbtn@0 {
> + userbtn0 {
> label = "eval_button_1";
> gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>;
> linux,code = <0x100>; /* BTN_MISC */
> };
> - userbtn@1 {
> + userbtn1 {
> label = "eval_button_2";
> gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
> linux,code = <0x100>; /* BTN_MISC */
> };
>
> - userbtn@2 {
> + userbtn2 {
> label = "eval_button_3";
> gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
> linux,code = <0x100>; /* BTN_MISC */
> --
> 2.30.2
>
>
>
