On Thu, Mar 16, 2023 at 02:42:07PM +0100, Oleksij Rempel wrote:
> The required functionality is essential for cable hot plugging or
> asynchronous link detection. In its current state, DSA will only operate
> if the cable was connected prior to booting.
>
> Signed-off-by: Oleksij Rempel <[email protected]>
> ---
> drivers/net/dsa.c | 4 ++--
> include/dsa.h | 1 +
> 2 files changed, 3 insertions(+), 2 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/drivers/net/dsa.c b/drivers/net/dsa.c
> index 793bbbb4f1..9c21564876 100644
> --- a/drivers/net/dsa.c
> +++ b/drivers/net/dsa.c
> @@ -104,8 +104,8 @@ static int dsa_port_start(struct eth_device *edev)
> return ret;
> }
>
> - ret = phy_device_connect(edev, ds->slave_mii_bus, dp->index, NULL, 0,
> - interface);
> + ret = phy_device_connect(edev, ds->slave_mii_bus, dp->index,
> + ops->adjust_link, 0, interface);
> if (ret)
> return ret;
>
> diff --git a/include/dsa.h b/include/dsa.h
> index e823bac0a7..527941c269 100644
> --- a/include/dsa.h
> +++ b/include/dsa.h
> @@ -55,6 +55,7 @@ struct dsa_switch_ops {
>
> int (*phy_read)(struct dsa_switch *ds, int port, int regnum);
> int (*phy_write)(struct dsa_switch *ds, int port, int regnum, u16 val);
> + void (*adjust_link)(struct eth_device *dev);
> };
>
> struct dsa_port {
> --
> 2.30.2
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
