On 11.09.23 14:35, Marco Felsch wrote:
> On 23-09-11, Ahmad Fatoum wrote:
>> fsl,tempmon-data is a deprecated property that has been replaced
>> upstream by a NVMEM cell pointing at the calibration value and so
>> made it into barebox breaking the driver.
>>
>> Switch to using the new property to fix the regression.
>
> The Linux driver code can handle the deprecated binding still, in case
> of old DTBs. Since the DTBS are builtin to barebox updating the DTB
> without the barebox binary make no sense. Anyway, do we need to take the
> deprecated binding into account as well like Linux does?
For this reason, only the new binding is implemented.
>
> Regards,
> Marco
>
>> Fixes: abef60363d8e ("dts: update to v5.8-rc1")
>> Signed-off-by: Ahmad Fatoum <[email protected]>
>> ---
>> drivers/aiodev/imx_thermal.c | 25 ++++---------------------
>> 1 file changed, 4 insertions(+), 21 deletions(-)
>>
>> diff --git a/drivers/aiodev/imx_thermal.c b/drivers/aiodev/imx_thermal.c
>> index 3263519cb241..2693ad05e0e5 100644
>> --- a/drivers/aiodev/imx_thermal.c
>> +++ b/drivers/aiodev/imx_thermal.c
>> @@ -22,6 +22,7 @@
>> #include <linux/math64.h>
>> #include <linux/log2.h>
>> #include <linux/clk.h>
>> +#include <linux/nvmem-consumer.h>
>> #include <mach/imx/imx6-anadig.h>
>> #include <io.h>
>> #include <aiodev.h>
>> @@ -29,7 +30,6 @@
>>
>> #define FACTOR0 10000000
>> #define MEASURE_FREQ 327
>> -#define OCOTP_ANA1_OFFSET (0xE * sizeof(uint32_t))
>>
>> struct imx_thermal_data {
>> int c1, c2;
>> @@ -109,30 +109,13 @@ static int imx_thermal_read(struct aiochannel *chan,
>> int *val)
>> static int imx_thermal_probe(struct device *dev)
>> {
>> uint32_t ocotp_ana1;
>> - struct device_node *node;
>> struct imx_thermal_data *imx_thermal;
>> - struct cdev *ocotp;
>> int t1, n1, t2, n2;
>> int ret;
>>
>> - node = of_parse_phandle(dev->of_node, "fsl,tempmon-data", 0);
>> - if (!node) {
>> - dev_err(dev, "No calibration data source\n");
>> - return -ENODEV;
>> - }
>> -
>> - ocotp = cdev_by_device_node(node);
>> - if (!ocotp) {
>> - dev_err(dev, "No OCOTP character device\n");
>> - return -ENODEV;
>> - }
>> -
>> - ret = cdev_read(ocotp, &ocotp_ana1, sizeof(ocotp_ana1),
>> - OCOTP_ANA1_OFFSET, 0);
>> - if (ret != sizeof(ocotp_ana1)) {
>> - dev_err(dev, "Failed to read calibration data\n");
>> - return ret < 0 ? ret : -EIO;
>> - }
>> + ret = nvmem_cell_read_variable_le_u32(dev, "calib", &ocotp_ana1);
>> + if (ret)
>> + return ret;
>>
>> imx_thermal = xzalloc(sizeof(*imx_thermal));
>> imx_thermal->base = syscon_base_lookup_by_phandle(dev->of_node,
>> --
>> 2.39.2
>>
>>
>>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
