On Fri, Mar 08, 2024 at 11:49:59AM +0100, Steffen Trumtrar wrote:
> Switch from PIO to DMA mode in send_cmd.
> 
> Signed-off-by: Steffen Trumtrar <s.trumt...@pengutronix.de>
> ---
> Everything needed for the Arasan SDHCI to use DMA instead of PIO is
> already present. Switch to it.
> 
> Tested on: ZynqMP.
> ---
>  drivers/mci/arasan-sdhci.c | 16 +++++++++-------
>  1 file changed, 9 insertions(+), 7 deletions(-)

The subject says the patch adds DMA *write* support. It's generally DMA
support, not only for write, right? I fixed that up accordingly while
applying.

Sascha

> 
> diff --git a/drivers/mci/arasan-sdhci.c b/drivers/mci/arasan-sdhci.c
> index 59afac7372..973e08779d 100644
> --- a/drivers/mci/arasan-sdhci.c
> +++ b/drivers/mci/arasan-sdhci.c
> @@ -147,6 +147,7 @@ static int arasan_sdhci_send_cmd(struct mci_host *mci, 
> struct mci_cmd *cmd,
>  {
>       struct arasan_sdhci_host *host = to_arasan_sdhci_host(mci);
>       u32 mask, command, xfer;
> +     dma_addr_t dma;
>       int ret;
>  
>       ret = sdhci_wait_idle(&host->sdhci, cmd);
> @@ -156,13 +157,14 @@ static int arasan_sdhci_send_cmd(struct mci_host *mci, 
> struct mci_cmd *cmd,
>       sdhci_write32(&host->sdhci, SDHCI_INT_STATUS, ~0);
>  
>       mask = SDHCI_INT_CMD_COMPLETE;
> -     if (data && data->flags == MMC_DATA_READ)
> -             mask |= SDHCI_INT_DATA_AVAIL;
>       if (cmd->resp_type & MMC_RSP_BUSY)
>               mask |= SDHCI_INT_XFER_COMPLETE;
>  
> -     sdhci_set_cmd_xfer_mode(&host->sdhci,
> -                             cmd, data, false, &command, &xfer);
> +     sdhci_setup_data_dma(&host->sdhci, data, &dma);
> +
> +     sdhci_set_cmd_xfer_mode(&host->sdhci, cmd, data,
> +                             dma == SDHCI_NO_DMA ? false : true,
> +                             &command, &xfer);
>  
>       sdhci_write8(&host->sdhci, SDHCI_TIMEOUT_CONTROL, TIMEOUT_VAL);
>       if (data) {
> @@ -174,15 +176,15 @@ static int arasan_sdhci_send_cmd(struct mci_host *mci, 
> struct mci_cmd *cmd,
>       sdhci_write32(&host->sdhci, SDHCI_ARGUMENT, cmd->cmdarg);
>       sdhci_write16(&host->sdhci, SDHCI_COMMAND, command);
>  
> -     ret = sdhci_wait_for_done(&host->sdhci, mask);
> +     ret = sdhci_wait_for_done(&host->sdhci, SDHCI_INT_CMD_COMPLETE);
>       if (ret)
>               goto error;
>  
>       sdhci_read_response(&host->sdhci, cmd);
> -     sdhci_write32(&host->sdhci, SDHCI_INT_STATUS, mask);
> +     sdhci_write32(&host->sdhci, SDHCI_INT_STATUS, SDHCI_INT_CMD_COMPLETE);
>  
>       if (data)
> -             ret = sdhci_transfer_data_pio(&host->sdhci, data);
> +             ret = sdhci_transfer_data_dma(&host->sdhci, data, dma);
>  
>  error:
>       if (ret) {
> 
> ---
> base-commit: ed7c14536d521793199abf0597164a46ba68e8e5
> change-id: 20240308-v2024-02-0-topic-arasan-dma-support-edd318cce298
> 
> Best regards,
> -- 
> Steffen Trumtrar <s.trumt...@pengutronix.de>
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Reply via email to