Some cards may have HS_CTRL_REL set as 0. This is obsolete
per-spec, but seems to indicate that write reliability was
factory-set. Therefore, just bail out early before checking the
parm.

Signed-off-by: Michael Grzeschik <[email protected]>
---
 commands/mmc.c | 23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

diff --git a/commands/mmc.c b/commands/mmc.c
index 718558f18b..dafc3a755f 100644
--- a/commands/mmc.c
+++ b/commands/mmc.c
@@ -138,6 +138,7 @@ static int do_mmc_write_reliability(int argc, char *argv[])
        const char *devpath;
        struct mci *mci;
        u8 *ext_csd;
+       int ret;
 
        if (argc - optind != 1) {
                printf("Usage: mmc write_reliability /dev/mmcX\n");
@@ -166,6 +167,15 @@ static int do_mmc_write_reliability(int argc, char *argv[])
                goto error;
        }
 
+       /* Some cards may have HS_CTRL_REL set as 0. This is obsolete
+        * per-spec, but seems to indicate that write reliability was
+        * factory-set. Therefore, just bail out early here
+        */
+       if ((ext_csd[EXT_CSD_WR_REL_SET] & 0x1f) == 0x1f) {
+               printf("reliable write already set\n");
+               goto out;
+       }
+
        if (!(ext_csd[EXT_CSD_WR_REL_PARAM] & EXT_CSD_HS_CTRL_REL)) {
                printf("Device doesn't support WR_REL_SET writes\n");
                goto error;
@@ -175,16 +185,13 @@ static int do_mmc_write_reliability(int argc, char 
*argv[])
         * Host has one opportunity to write all of the bits. Separate writes to
         * individual bits are not permitted so set all bits for now.
         */
-       if ((ext_csd[EXT_CSD_WR_REL_SET] & 0x1f) != 0x1f) {
-               int ret;
-
-               ret = mci_switch(mci, EXT_CSD_WR_REL_SET, 0x1f);
-               if (ret) {
-                       printf("Failure to write to EXT_CSD_WR_REL_SET\n");
-                       goto error;
-               }
+       ret = mci_switch(mci, EXT_CSD_WR_REL_SET, 0x1f);
+       if (ret) {
+               printf("Failure to write to EXT_CSD_WR_REL_SET\n");
+               goto error;
        }
 
+out:
        dma_free(ext_csd);
 
        return COMMAND_SUCCESS;
-- 
2.39.5


Reply via email to