Signed-off-by: Sascha Hauer <[email protected]> --- Documentation/boards/layerscape.rst | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/Documentation/boards/layerscape.rst b/Documentation/boards/layerscape.rst index ae089539e5..5791b86326 100644 --- a/Documentation/boards/layerscape.rst +++ b/Documentation/boards/layerscape.rst @@ -37,13 +37,22 @@ Flashing to the eMMC is possible likewise:: In such a case, using eMMC and SD-Card at the same time is not possible. Boot from QSPI to flash the eMMC. +Get and Build the Trusted Firmware A +------------------------------------ + +Get TF-A from https://github.com/ARM-software/arm-trusted-firmware.git and build with:: + + make PLAT=ls1046ardb + cp build/ls1046ardb/release/bl31.bin ${barebox_srctree}/firmware/ls1046a-bl31.bin + +Although the binary is for a specific board (LS1046A-RDB) it should work on any other +board as well. + Firmware Blobs -------------- Network: `fsl_fman_ucode_ls1046_r1.0_106_4_18.bin <https://github.com/NXP/qoriq-fm-ucode/raw/integration/fsl_fman_ucode_ls1046_r1.0_106_4_18.bin>`_. -PSCI Firmware: `ppa-ls1046a.bin <https://github.com/NXP/qoriq-ppa-binary/raw/integration/soc-ls1046/ppa.itb>`_. - Layerscape boards ----------------- -- 2.39.5
