k3.rst describes the initial k3 documentation when we only had second stage support after U-Boot. This is now obsolete and the full documentation is in ti-k3.rst.
Signed-off-by: Sascha Hauer <s.ha...@pengutronix.de> --- Documentation/boards/k3.rst | 29 ----------------------------- 1 file changed, 29 deletions(-) delete mode 100644 Documentation/boards/k3.rst diff --git a/Documentation/boards/k3.rst b/Documentation/boards/k3.rst deleted file mode 100644 index f675c4510c..0000000000 --- a/Documentation/boards/k3.rst +++ /dev/null @@ -1,29 +0,0 @@ -Texas Instruments K3 -==================== - -K3 is for Keystone 3 and denotes a family of SoCs from Texas Instruments. From these -SoCs the AM62x is currently supported under barebox. The boot flow needs several images, -only the last stage is supported by barebox. To start up the help of U-Boot is still -needed. - -The board currently supported by barebox is the BeaglePlay board, see -https://www.beagleboard.org/boards/beagleplay. The following examples assume -this board is used. - -Building barebox ----------------- -.. code-block:: sh - - make ARCH=arm CROSS_COMPILE=<ARM toolchain prefix> multi_v8_defconfig - -Running barebox ---------------- - -barebox can be started from running U-Boot with: - -.. code-block:: sh - - dhcp 0x82000000 <serverip>:barebox-beagleplay.img; bootm 0x82000000 - -To start barebox from SD/eMMC replace the ``u-boot.img`` on a bootable SD/eMMC card -with the content of ``images/barebox-beagleplay-fit.img`` -- 2.39.5
