Hi Jonas,
On Tue, Jun 10, 2025 at 05:24:56PM +0200, Jonas Rebmann wrote:
> Continue probing spi connected devices without an alias. Setting bus_num
> to -1 will assign numbers automatically.
>
> Signed-off-by: Jonas Rebmann <j...@pengutronix.de>
> ---
> drivers/spi/imx_spi.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/spi/imx_spi.c b/drivers/spi/imx_spi.c
> index
> bfb4b413ebab0e62e92f61db52a866a1d55b9ae3..14c4baada8e03ce1b38031afc68de7b261d43e78
> 100644
> --- a/drivers/spi/imx_spi.c
> +++ b/drivers/spi/imx_spi.c
> @@ -604,9 +604,10 @@ static int imx_spi_probe(struct device *dev)
> imx->cs_array = pdata->chipselect;
> } else if (IS_ENABLED(CONFIG_OFDEVICE)) {
> ret = of_alias_get_id(dev->of_node, "spi");
> - if (ret < 0)
> - goto err_free;
> - master->bus_num = ret;
> + if (ret >= 0)
> + master->bus_num = ret;
> + else
> + master->bus_num = -1;
Calling of_alias_get_id() is unnecessary. Just set bus_num = -1, in that
case this is in spi_register_controller() should trigger:
if ((ctrl->bus_num < 0) && ctrl->dev->of_node)
ctrl->bus_num = of_alias_get_id(ctrl->dev->of_node, "spi");
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
