From: Marco Felsch <m.fel...@pengutronix.de>
Add a helper function which can be used by the board code to setup an
early non-secure TZASC region1 which covers the whole SDRAM size.
This eliminates the current workaround of configuring region0 as
non-secure/secure region.
Acked-by: Ahmad Fatoum <a.fat...@pengutronix.de>
Signed-off-by: Marco Felsch <m.fel...@pengutronix.de>
Signed-off-by: Sascha Hauer <s.ha...@pengutronix.de>
---
arch/arm/mach-imx/Makefile | 2 +-
arch/arm/mach-imx/tzasc.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++
include/mach/imx/tzasc.h | 2 ++
3 files changed, 56 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index
23f51fc660197c2da923697e0c303eec8c85e2b4..07e14b392d6c6872aeed382c1e67899184304cf6
100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -21,7 +21,7 @@ obj-pbl-$(CONFIG_ARCH_IMX8M) += imx8m.o
obj-pbl-$(CONFIG_ARCH_IMX_SCRATCHMEM) += scratch.o
obj-$(CONFIG_ARCH_IMX9) += imx9.o imx-v3-image.o
lwl-$(CONFIG_ARCH_IMX_ATF) += atf.o
-obj-pbl-$(CONFIG_ARCH_IMX8M) += tzasc.o
+obj-pbl-y += tzasc.o
obj-pbl-$(CONFIG_ARCH_IMX_ROMAPI) += romapi.o
obj-$(CONFIG_IMX_IIM) += iim.o
obj-$(CONFIG_NAND_IMX) += nand.o
diff --git a/arch/arm/mach-imx/tzasc.c b/arch/arm/mach-imx/tzasc.c
index
2a48f841af49d3f14bc017950d2553f7f52b7416..169c4b9801e5fdd01edd3c5661418a945cf21c55
100644
--- a/arch/arm/mach-imx/tzasc.c
+++ b/arch/arm/mach-imx/tzasc.c
@@ -3,8 +3,10 @@
#define pr_fmt(fmt) "tzc380: " fmt
#include <common.h>
+#include <mach/imx/esdctl.h>
#include <mach/imx/generic.h>
#include <mach/imx/tzasc.h>
+#include <mach/imx/imx6-regs.h>
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/log2.h>
@@ -71,6 +73,9 @@
* SoC specific defines
******************************************************************************/
+#define MX6_TZASC1_BASE 0x21d0000
+#define MX6_TZASC2_BASE 0x21d4000
+
#define GPR_TZASC_EN BIT(0)
#define GPR_TZASC_ID_SWAP_BYPASS BIT(1)
#define GPR_TZASC_EN_LOCK BIT(16)
@@ -250,6 +255,54 @@ tzc380_auto_configure(struct tzc380_instance *tzc380,
unsigned int region,
* SoC specific helpers
******************************************************************************/
+static void imx_tzc380_init_and_setup(void __iomem *base, unsigned int region,
+ resource_size_t region_base,
+ resource_size_t region_size,
+ unsigned int region_attr)
+{
+ struct tzc380_instance *tzasc = tzc380_init(base);
+
+ tzc380_auto_configure(tzasc, region, region_base, region_size,
+ region_attr);
+}
+
+/*
+ * imx6q_tzc380_early_ns_region1 - configure the whole DRAM as non-secure
+ * region1
+ *
+ * Passing data between TEE and barebox need to follow some requirements:
+ * - the location can be accessed by the normal and secure world
+ * - the mapping in the normal and secure world must be the same to avoid
+ * manual cache maintenance.
+ *
+ * Therefore this function reads the DRAM size out of the MMDC controller and
+ * configures the whole size as non-secure TZC380 region1. This allows the
+ * early TEE code to map the location as non-secure to while writing the data
+ * e.g. device-tee-overlays. Later on the TEE may reconfigure and lock the
+ * TZC380 regions. The reconfiguration needs to ensure that the exchange data
+ * location is still accessible by the normal world.
+ */
+void imx6q_tzc380_early_ns_region1(void)
+{
+ resource_size_t ram_sz = imx6_get_mmdc_sdram_size();
+
+ imx_tzc380_init_and_setup(IOMEM(MX6_TZASC1_BASE), 1,
+ MX6_MMDC_PORT01_BASE_ADDR, ram_sz,
+ TZC380_REGION_SP_NS_RW);
+ imx_tzc380_init_and_setup(IOMEM(MX6_TZASC2_BASE), 1,
+ MX6_MMDC_PORT01_BASE_ADDR, ram_sz,
+ TZC380_REGION_SP_NS_RW);
+}
+
+void imx6ul_tzc380_early_ns_region1(void)
+{
+ resource_size_t ram_sz = imx6_get_mmdc_sdram_size();
+
+ imx_tzc380_init_and_setup(IOMEM(MX6_TZASC1_BASE), 1,
+ MX6_MMDC_PORT0_BASE_ADDR, ram_sz,
+ TZC380_REGION_SP_NS_RW);
+}
+
void imx8m_tzc380_init(void)
{
u32 __iomem *gpr = IOMEM(MX8M_IOMUXC_GPR_BASE_ADDR);
diff --git a/include/mach/imx/tzasc.h b/include/mach/imx/tzasc.h
index
51c86f168ee41db8659c0ad5f48ca1f102cb76d3..eb479ad55c9c101a5fb47fc4a7178b3669b9e44f
100644
--- a/include/mach/imx/tzasc.h
+++ b/include/mach/imx/tzasc.h
@@ -6,6 +6,8 @@
#include <linux/types.h>
#include <asm/system.h>
+void imx6q_tzc380_early_ns_region1(void);
+void imx6ul_tzc380_early_ns_region1(void);
void imx8m_tzc380_init(void);
bool imx8m_tzc380_is_enabled(void);
--
2.39.5
