On 04.07.25 21:26, Johannes Roith wrote: > Added documentation and build instructions for the Zynq 7000 and the > Avnet Zedboard. > > Signed-off-by: Johannes Roith <johannes@gnu-linux.rocks>
Reviewed-by: Ahmad Fatoum <a.fat...@pengutronix.de> Thank you! Ahmad > --- > Documentation/boards/zynq.rst | 25 +++++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > create mode 100644 Documentation/boards/zynq.rst > > diff --git a/Documentation/boards/zynq.rst b/Documentation/boards/zynq.rst > new file mode 100644 > index 0000000000..b7aaf3892c > --- /dev/null > +++ b/Documentation/boards/zynq.rst > @@ -0,0 +1,25 @@ > +Xilinx Zynq 7000 > +================ > + > +Barebox has support for the Xilinx Zynq 7000. > + > +Image creation > +-------------- > + > +The Zynq defconfig supports the Avnet ZedBoard. Use it to build the Barebox > image:: > + > + make ARCH=arm zynq_defconfig > + make ARCH=arm > + > +Create a FAT partition as the first partition of the SD card and copy the > +produced image ``images/barebox-avnet-zedboard.img`` into this partition. > +Rename the image to ``BOOT.bin`` which is the name the Primary Bootloader of > the > +Zynq 7000 expects for the next stage. > + > +Bitstream loading > +----------------- > + > +The Zynq 7000 features an ARM Cortex-A9 processor (Processing System, PS) > +alongside a Programmable Logic (PL) component that functions as an FPGA. > Barebox > +provides support for loading a bitstream into the PL through its firmware > +interface. -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
