Building the docs warns about the lack of indentation. Signed-off-by: Ahmad Fatoum <[email protected]> --- Documentation/boards/ti-k3-am62lx.rst | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/Documentation/boards/ti-k3-am62lx.rst b/Documentation/boards/ti-k3-am62lx.rst index 1ca5f3403bac..f0a547016664 100644 --- a/Documentation/boards/ti-k3-am62lx.rst +++ b/Documentation/boards/ti-k3-am62lx.rst @@ -12,12 +12,13 @@ power domains and DRAM. When this is done the BL1 branches back to the ROM which the second stage which contains the TF-A BL31, barebox proper and optionally OP-TEE. .. note:: -The AM62lx support currently depends on a modified downstream version of the TF-A. See -https://lore.kernel.org/[email protected] for a patch -series to be applied on the Downstream TF-A. Be aware that barebox might need further -changes to be compatible with future upstream TF-A support. Specifically the SCMI clock -IDs used in the assigned-clock-parents properties might not match the future upstream -solution. + + The AM62lx support currently depends on a modified downstream version of the TF-A. See + https://lore.kernel.org/[email protected] for a patch + series to be applied on the Downstream TF-A. Be aware that barebox might need further + changes to be compatible with future upstream TF-A support. Specifically the SCMI clock + IDs used in the assigned-clock-parents properties might not match the future upstream + solution. Building TF-A ------------- -- 2.47.3
