Hello Sascha. Seems, It seems you forgot "[PATCH v2] clk: rockchip rk3588: configure CPLL in driver" patch.
ср, 12 нояб. 2025 г. в 11:22, Sascha Hauer <[email protected]>: > > Hi All, > > barebox 2025.11.0 is released. > > This is one of the smaller releases this time. We have support for two > new boards, the i.MX93 FRDM board and the Enclustra Mercury+ SA2 board. > > The NFS code does much better checking of the data coming from the > network so that memory overflows on corrupted NFS packets are avoided. > > The parted command is now able to create a partition up to the end of > the device which simplifies scripting. > > See below for the migration guide and a full list of patches that went > into this release. > > Have Fun! > Sascha > > Migration notes for v2025.11.0 > ============================== > > i.MX GPIOs > ---------- > > Reading output GPIOs now returns the configured output level instead > of reading back the input register. This aligns us with what Linux > is doing, but may falsify readings of single-ended GPIOs that have > the SION bit configured. > > Board support > ------------- > > Karo TX6X > ^^^^^^^^^ > > The barebox update handler for this SoM no longer unconditionally updates > /dev/mmc3.boot0, but instead it now updates the inactive boot partition > on /dev/mmc3 and then sets it as active allowing for power-fail safety. > > ---------------------------------------------------------------- > Ahmad Fatoum (39): > efi: payload: split out payload Kconfig symbols > fs: factor out final file open logic out of openat() > fs: allocate inodes for O_TMPFILE-created files > tlsf: move kasan_poison_shadow into tlsf_add_pool > efi: payload: bootm: add support for fit image > efi: payload: make selectable without COMPILE_TEST > tlsf: use compiler's static_assert implementation > fs: make dpath always panic on OOM > fs: add filepath helper > test: self: malloc: fix double free after expect_alloc_fail > test: py: fit: don't remove generated FIT again from testfs > FIT: compare key name hint with streq_ptr for clarity > sandbox: cut down on if clauses using SANDBOX_LIBS-y > commands: devinfo: print Deep Probe status for top-level machine device > devinfo: print / as device tree node for the root node > test: self: malloc: fix false positive when malloc store is registered > efi: payload: do not check for heap addresses in efi_load_image > test: py: dm: skip test if veritysetup command is disabled > test: py: network: skip test if tftp command is missing > test: py: fix pycodestyle warnings > test: fit: power cycle after tests in booted barebox > Documentation: gen_commands.py: escape special characters > Documentation: gen_commands.py: align whitespace with coding style > Documentation: gen_commands.py: rework if statements for compactness > Documentation: gen_commands.py: use literal block for help text > Documentation: gen_commands.py: escape name in title > kbuild: add make check target > range: fix corner cases when exclusive end is zero > test: self: add range.h test > ARM: i.MX8M: romapi: skip zero_page_access() if MMU is disabled > ARM: mmu: have zero_page_remappable() check MMU status > serial: ns16550: add UART compatible after upstream compatibility break > ARM: mmu: fix hang when reserved memory at start of RAM > efi: payload: drop unreferenced efi_do_execute_image() > filetype: introduce separate filetype_x86_efi_linux_image > efi: payload: handover: fix filetype match > efi: payload: reinstate error message when booting non-EFI stubbed > kernel > efi: payload: align kernel boot status messages > migration-guides: add notes for v2024.09.0 to v2025.04.0 > > Chali Anis (6): > tlsf: support on-demand requesting memory from external store > efi: payload: add support for EFI initrd media protocol > efi: payload: earlymem: allocate only the barebox needs in term of > memory > efi: payload: split image handling from legacy handover boot and add > linux x86 image filetype > efi: payload: bootm: add support for efi stub boot > ARM: efi: add a generic defconfig for v8 efi payload > > David Picard (2): > ARM: SoCFPGA: Enclustra-SA2: Add handoff files > ARM: SoCFPGA: Add Enclustra Mercury+ SA2 module > > Fabian Pfitzner (1): > ARM: i.MX: karo-tx6: use mmcboot handler > > Fabian Pflug (2): > common: deep-probe: include of for of_device_id > ARM: boards: i.MX93: Add NXP FRDM i.MX93 support > > Jonas Rebmann (10): > virtio: Stop spamming debug buffer > test: when testfs feature is available, always enable it > test: provide testfs via fixture > test: move dm-verity testdata generation to fixture > test: move fitimage testdata generation to fixture and drop script > test: py: test_bootchooser: remove dead code > commands: tlv: clarify error opening tlv > configs: enable tlv command for multi_v7 and multi_v8 > test: py: add TLV integration tests > public-keys: fix key->size for ECDSA keys > > Marco Felsch (1): > aiodev: add missing headers > > Maud Spierings (5): > ARM: i.MX8m: add ddr3 ram support > ARM: i.MX: Fix the iomux DSE defines for imx8mp > gpio: i.MX: make _get_value() able to read output pin state > Documentation: migration-2025.11.0: add note about new gpio behaviour > parted: add max option to mkpart <end> > > Sascha Hauer (29): > dts: update to v6.17 > ARM: dts: am62lx: add SD reboot mode > fs: remove redundant dev argument from fs_driver operations > fs: move fs_driver operations to struct file_operations > dts: update to v6.18-rc1 > ARM: i.MX: enable new boards in defconfigs > dts: update to v6.18-rc2 > commands: parted: Do not align partition end > ci: container: upgrade after update > public-keys: ecdsa: remove list in ecdsa keys > public-keys: move list out of struct public_key > public-keys: rsa: allow struct public_key to be const > public-keys: rsa: remove unused functions > public-keys: make const > ARM: dts: k3-am62l: Set cpsw3g status to disabled by default > Merge branch 'for-next/dts' > Merge branch 'for-next/efi' > Merge branch 'for-next/fs' > Merge branch 'for-next/imx' > Merge branch 'for-next/k3' > Merge branch 'for-next/misc' > Merge branch 'for-next/socfpga' > Merge branch 'for-next/tlv' > mtd: peb: mtd_peb_read(): move error message to caller > fs: nfs: drop PROG_NFS special casing > fs: nfs: do not read past packets > fs: nfs: use dev_* for messages > fs: nfs: reduce unwanted message to debug level > Release v2025.11.0 > > Steffen Trumtrar (1): > mci: add cadence sdhci host > > Thorsten Scherer (1): > usb: dwc3: am62: Fix name of driver struct > > > -- > Pengutronix e.K. | | > Steuerwalder Str. 21 | http://www.pengutronix.de/ | > 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | >
