Documentation: i.MX: kindle: fix ReST warnings - Reorder the numbering, so there isn't 2. twice - Fix indentation, of sub-bulletpoint
Signed-off-by: Ahmad Fatoum <[email protected]> --- Documentation/boards/imx/amazon-kindle-6-7.rst | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/Documentation/boards/imx/amazon-kindle-6-7.rst b/Documentation/boards/imx/amazon-kindle-6-7.rst index c57d27afe421..4769fb2ad59e 100644 --- a/Documentation/boards/imx/amazon-kindle-6-7.rst +++ b/Documentation/boards/imx/amazon-kindle-6-7.rst @@ -61,15 +61,15 @@ into USB boot mode, the eMMC may be disabled temporarily. 1. Connect the Kindle to your host computer with a USB cable. 2. Disable the eMMC - * for the DP75SDI pull the left resistor left of TP806/TP807 (below - TP914) facing the eMMC to zero. -2. Power down the device by holding the power button until the power LED goes + (for the DP75SDI pull the left resistor left of TP806/TP807 (below + TP914) facing the eMMC to zero). +3. Power down the device by holding the power button until the power LED goes dark (about 12-15 seconds). -3. Release the power button. -4. Free the eMMC pin. -5. After 10-20 seconds, a new USB device named ``SE Blank MEGREZ`` should +4. Release the power button. +5. Free the eMMC pin. +6. After 10-20 seconds, a new USB device named ``SE Blank MEGREZ`` should appear on your host computer. -6. Use imx-usb-loader to boot from USB. +7. Use imx-usb-loader to boot from USB. .. code-block:: console -- 2.47.3
