Hi Rob, On 25-12-12, Rob Herring (Arm) wrote: > These .dtsi files are not included anywhere in the tree and can't be > tested.
not in the tree but by other projects, please see below. > Signed-off-by: Rob Herring (Arm) <[email protected]> > --- > .../dts/nxp/imx/imx6dl-kontron-samx6i.dtsi | 12 ----- > .../dts/nxp/imx/imx6q-kontron-samx6i.dtsi | 12 ----- > .../boot/dts/nxp/imx/imx6qdl-pico-dwarf.dtsi | 45 ---------------- > .../boot/dts/nxp/imx/imx6qdl-pico-nymph.dtsi | 54 ------------------- > 4 files changed, 123 deletions(-) > delete mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi > delete mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi > delete mode 100644 arch/arm/boot/dts/nxp/imx/imx6qdl-pico-dwarf.dtsi > delete mode 100644 arch/arm/boot/dts/nxp/imx/imx6qdl-pico-nymph.dtsi > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi > b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi > deleted file mode 100644 > index 5a9b819d7ee8..000000000000 > --- a/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi > +++ /dev/null > @@ -1,12 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0 OR X11 > -/* > - * Copyright 2019 (C) Pengutronix, Marco Felsch <[email protected]> > - */ > - > -#include "imx6dl.dtsi" > -#include "imx6qdl-kontron-samx6i.dtsi" > - > -/ { > - model = "Kontron SMARC-sAMX6i Dual-Lite/Solo"; > - compatible = "kontron,imx6dl-samx6i", "fsl,imx6dl"; > -}; > diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi > b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi > deleted file mode 100644 > index e76963436079..000000000000 > --- a/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi > +++ /dev/null > @@ -1,12 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0 OR X11 > -/* > - * Copyright 2019 (C) Pengutronix, Marco Felsch <[email protected]> > - */ > - > -#include "imx6q.dtsi" > -#include "imx6qdl-kontron-samx6i.dtsi" > - > -/ { > - model = "Kontron SMARC-sAMX6i Quad/Dual"; > - compatible = "kontron,imx6q-samx6i", "fsl,imx6q"; > -}; I can't speak for the other two .dtsi files but both kontron .dtsi files are used by barebox: - https://elixir.bootlin.com/barebox/v2025.11.0/source/arch/arm/dts/imx6dl-samx6i.dts#L8 - https://elixir.bootlin.com/barebox/v2025.11.0/source/arch/arm/dts/imx6q-samx6i.dts#L8 Removing them here will cause a regression for barebox. Regards, Marco > diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-dwarf.dtsi > b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-dwarf.dtsi > deleted file mode 100644 > index 3a968782e854..000000000000 > --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-dwarf.dtsi > +++ /dev/null > @@ -1,45 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0+ OR MIT > -// > -// Copyright 2017 NXP > - > -#include "imx6qdl-pico.dtsi" > - > -/ { > - leds { > - compatible = "gpio-leds"; > - pinctrl-names = "default"; > - pinctrl-0 = <&pinctrl_gpio_leds>; > - > - led { > - label = "gpio-led"; > - gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; > - }; > - }; > - > -}; > - > -&i2c1 { > - mpl3115@60 { > - compatible = "fsl,mpl3115"; > - reg = <0x60>; > - }; > -}; > - > -&i2c2 { > - io-expander@25 { > - compatible = "nxp,pca9554"; > - reg = <0x25>; > - gpio-controller; > - #gpio-cells = <2>; > - #interrupt-cells = <2>; > - }; > - > -}; > - > -&iomuxc { > - pinctrl_gpio_leds: gpioledsgrp { > - fsl,pins = < > - MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0 > - >; > - }; > -}; > diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-nymph.dtsi > b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-nymph.dtsi > deleted file mode 100644 > index 3d56a4216448..000000000000 > --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-nymph.dtsi > +++ /dev/null > @@ -1,54 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0+ OR MIT > - > -#include "imx6qdl-pico.dtsi" > - > -/ { > - leds { > - compatible = "gpio-leds"; > - pinctrl-names = "default"; > - pinctrl-0 = <&pinctrl_gpio_leds>; > - > - led { > - label = "gpio-led"; > - gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; > - }; > - }; > - > -}; > - > -&i2c1 { > - adc@52 { > - compatible = "ti,adc081c"; > - reg = <0x52>; > - vref-supply = <®_2p5v>; > - }; > -}; > - > -&i2c2 { > - io-expander@25 { > - compatible = "nxp,pca9554"; > - reg = <0x25>; > - gpio-controller; > - #gpio-cells = <2>; > - #interrupt-cells = <2>; > - }; > -}; > - > -&i2c3 { > - rtc@68 { > - compatible = "dallas,ds1337"; > - reg = <0x68>; > - }; > -}; > - > -&pcie { > - status = "okay"; > -}; > - > -&iomuxc { > - pinctrl_gpio_leds: gpioledsgrp { > - fsl,pins = < > - MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0 > - >; > - }; > -}; > -- > 2.51.0 > > > -- #gernperDu #CallMeByMyFirstName Pengutronix e.K. | | Steuerwalder Str. 21 | https://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
