Hi, On 12/19/25 10:06 AM, Fabian Pflug wrote: > There is a Kconfig option for the field return, that is also documented, > so using it here instead of providing a headerfile to patch. > > Reviewed-by: Marco Felsch <[email protected]> > Signed-off-by: Fabian Pflug <[email protected]> > --- > include/mach/imx/habv4-imx6-gencsf-template.h | 11 +++-------- > 1 file changed, 3 insertions(+), 8 deletions(-) > > diff --git a/include/mach/imx/habv4-imx6-gencsf-template.h > b/include/mach/imx/habv4-imx6-gencsf-template.h > index 45da2981cb..c24bf84b85 100644 > --- a/include/mach/imx/habv4-imx6-gencsf-template.h > +++ b/include/mach/imx/habv4-imx6-gencsf-template.h > @@ -39,17 +39,12 @@ hab Engine = SETUP_HABV4_ENGINE > hab Features = SETUP_HABV4_FEATURES > #endif > > -/* > -// allow fusing FIELD_RETURN > -// # ocotp0.permanent_write_enable=1 > -// # mw -l -d /dev/imx-ocotp 0xb8 0x1 > +#if defined(CONFIG_HABV4_CSF_UNLOCK_FIELD_RETURN) > hab [Unlock] > hab Engine = OCOTP > hab Features = FIELD RETURN > -// device-specific UID: > -// $ dd if=/sys/bus/nvmem/devices/imx-ocotp0/nvmem bs=4 skip=1 count=2 > status=none | hexdump -ve '1/1 "0x%.2x, "' | sed 's/, $//' > -hab UID = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08 > -*/ > +hab UID = HABV4_CSF_UNLOCK_UID
How can this work without a CONFIG_ in front of the option? Thanks, Ahmad > +#endif > > hab [Install Key] > /* verification key index in key store (0, 2...4) */ > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
