Hello Ahmad! On Tue, Jan 06, 2026 at 12:33:21PM +0100, Ahmad Fatoum wrote:
> When enabled, the same barebox build generates two images: > barebox-am33xx-beaglebone-mlo.mmc.img -> MLO > barebox-am33xx-beaglebone.img -> barebox.bin > > Both are placed in the VFAT. I do not necessaryly need two images, if booting is now done with a combined one, which is new, if I understood this correct. In my images deploy dir the following images showed up after my migration to walnascar away from the meta-barebox layer which is not used anymore. barebox-am33xx-afi-gf.img barebox-am33xx-baltos.img barebox-am33xx-beaglebone.img barebox-am33xx-myirtech.img barebox-am33xx-phytec-phycard.img barebox-am33xx-phytec-phycore-emmc.img barebox-am33xx-phytec-phycore-no-eeprom.img barebox-am33xx-phytec-phycore-no-spi-no-eeprom.img barebox-am33xx-phytec-phycore-no-spi.img barebox-am33xx-phytec-phycore.img barebox-am33xx-phytec-phyflex-no-eeprom.img barebox-am33xx-phytec-phyflex-no-spi-no-eeprom.img barebox-am33xx-phytec-phyflex-no-spi.img barebox-am33xx-phytec-phyflex.img barebox-am35xx-pfc-750-820x.img barebox-beagleboard.img barebox-dt-2nd.img And that is, when I wondered myself, if - in our case - barebox-am33xx-beaglebone.img is going to be named MLO and put into the vfat boot partition or if I have something missing or done wrong, which is absolutely possible, of course! So, no *mlo* file. > For your old setup, you will need two recipes. Just define your own > barebox.bb and barebox-pbl.bb recipes and inherit barebox in each and > use different configs. All the core logic is in a barebox.bbclass to > allow you to easily create your own recipes. So only using this approach with two barebox.bb and barebox-pbl.bb I would get an additional *mlo* file, right? As said, if I can omit this approach this is fine by me. Regards Konsti -- INSIDE M2M GmbH Konstantin Kletschke Berenbosteler Straße 76 B 30823 Garbsen Telefon: +49 (0) 5137 90950136 Mobil: +49 (0) 151 15256238 Fax: +49 (0) 5137 9095010 [email protected] http://www.inside-m2m.de Geschäftsführung: Michael Emmert, Derek Uhlig HRB: 111204, AG Hannover
