Add RK3562 naneng combphy support for PCIe and USB3 modes with SSC, CTLE, PLL configuration, and support for 24MHz/25MHz/100MHz reference clocks. NOTE: this commit is compile-tested Only. I tested only USB 2.0.
Signed-off-by: Sohaib Mohamed <[email protected]> --- drivers/phy/rockchip/phy-rockchip-naneng-combphy.c | 161 +++++++++++++++++++++ 1 file changed, 161 insertions(+) diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c index 7951a109f5..4a2e5f11ee 100644 --- a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c +++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c @@ -402,6 +402,163 @@ static int rockchip_combphy_probe(struct device *dev) return PTR_ERR_OR_ZERO(phy_provider); } +static int rk3562_combphy_cfg(struct rockchip_combphy_priv *priv) +{ + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; + unsigned long rate; + u32 val; + + switch (priv->type) { + case PHY_TYPE_PCIE: + /* Set SSC downward spread spectrum */ + rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK, + PHYREG32_SSC_DOWNWARD << PHYREG32_SSC_DIR_SHIFT, + PHYREG32); + + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true); + break; + case PHY_TYPE_USB3: + /* Set SSC downward spread spectrum */ + rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK, + PHYREG32_SSC_DOWNWARD << PHYREG32_SSC_DIR_SHIFT, + PHYREG32); + + /* Enable adaptive CTLE for USB3.0 Rx */ + rockchip_combphy_updatel(priv, PHYREG15_CTLE_EN, + PHYREG15_CTLE_EN, PHYREG15); + + /* Set PLL KVCO fine tuning signals */ + rockchip_combphy_updatel(priv, PHYREG33_PLL_KVCO_MASK, + BIT(3), PHYREG33); + + /* Set PLL LPF R1 to su_trim[10:7]=1001 */ + writel(PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + PHYREG12); + + /* Set PLL input clock divider 1/2 */ + val = FIELD_PREP(PHYREG6_PLL_DIV_MASK, PHYREG6_PLL_DIV_2); + rockchip_combphy_updatel(priv, PHYREG6_PLL_DIV_MASK, val, PHYREG6); + + /* Set PLL loop divider */ + writel(PHYREG18_PLL_LOOP, priv->mmio + PHYREG18); + + /* Set PLL KVCO to min and set PLL charge pump current to max */ + writel(PHYREG11_SU_TRIM_0_7, priv->mmio + PHYREG11); + + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_usb, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false); + rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true); + break; + default: + dev_err(priv->dev, "incompatible PHY type\n"); + return -EINVAL; + } + + rate = clk_get_rate(priv->refclk); + + switch (rate) { + case REF_CLOCK_24MHz: + if (priv->type == PHY_TYPE_USB3) { + /* Set ssc_cnt[9:0]=0101111101 & 31.5KHz */ + val = FIELD_PREP(PHYREG15_SSC_CNT_MASK, + PHYREG15_SSC_CNT_VALUE); + rockchip_combphy_updatel(priv, PHYREG15_SSC_CNT_MASK, + val, PHYREG15); + + writel(PHYREG16_SSC_CNT_VALUE, priv->mmio + PHYREG16); + } + break; + case REF_CLOCK_25MHz: + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true); + break; + case REF_CLOCK_100MHz: + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true); + if (priv->type == PHY_TYPE_PCIE) { + /* Gate_tx_pck_sel length select for L1ss support */ + rockchip_combphy_updatel(priv, PHYREG13_CKRCV_AMP0, + PHYREG13_CKRCV_AMP0, + PHYREG30); + /* PLL KVCO tuning fine */ + val = FIELD_PREP(PHYREG33_PLL_KVCO_MASK, + PHYREG33_PLL_KVCO_VALUE); + rockchip_combphy_updatel(priv, PHYREG33_PLL_KVCO_MASK, + val, PHYREG33); + + /* Enable controlling random jitter, aka RMJ */ + writel(0x4, priv->mmio + PHYREG12); + + val = PHYREG6_PLL_DIV_2 << PHYREG6_PLL_DIV_SHIFT; + rockchip_combphy_updatel(priv, PHYREG6_PLL_DIV_MASK, + val, PHYREG6); + + writel(0x32, priv->mmio + PHYREG18); + writel(0xf0, priv->mmio + PHYREG11); + } + break; + default: + dev_err(priv->dev, "Unsupported rate: %lu\n", rate); + return -EINVAL; + } + + if (priv->ext_refclk) { + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true); + if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) { + val = PHYREG13_RESISTER_HIGH_Z << PHYREG13_RESISTER_SHIFT; + val |= PHYREG13_CKRCV_AMP0; + rockchip_combphy_updatel(priv, PHYREG13_RESISTER_MASK, val, + PHYREG13); + + val = readl(priv->mmio + PHYREG14); + val |= PHYREG14_CKRCV_AMP1; + writel(val, priv->mmio + PHYREG14); + } + } + + if (priv->enable_ssc) { + val = readl(priv->mmio + PHYREG8); + val |= PHYREG8_SSC_EN; + writel(val, priv->mmio + PHYREG8); + } + + return 0; +} + +static const struct rockchip_combphy_grfcfg rk3562_combphy_grfcfgs = { + /* pipe-phy-grf */ + .pcie_mode_set = { 0x0000, 5, 0, 0x00, 0x11 }, + .usb_mode_set = { 0x0000, 5, 0, 0x00, 0x04 }, + .pipe_rxterm_set = { 0x0000, 12, 12, 0x00, 0x01 }, + .pipe_txelec_set = { 0x0004, 1, 1, 0x00, 0x01 }, + .pipe_txcomp_set = { 0x0004, 4, 4, 0x00, 0x01 }, + .pipe_clk_25m = { 0x0004, 14, 13, 0x00, 0x01 }, + .pipe_clk_100m = { 0x0004, 14, 13, 0x00, 0x02 }, + .pipe_phymode_sel = { 0x0008, 1, 1, 0x00, 0x01 }, + .pipe_rate_sel = { 0x0008, 2, 2, 0x00, 0x01 }, + .pipe_rxterm_sel = { 0x0008, 8, 8, 0x00, 0x01 }, + .pipe_txelec_sel = { 0x0008, 12, 12, 0x00, 0x01 }, + .pipe_txcomp_sel = { 0x0008, 15, 15, 0x00, 0x01 }, + .pipe_clk_ext = { 0x000c, 9, 8, 0x02, 0x01 }, + .pipe_sel_usb = { 0x000c, 14, 13, 0x00, 0x01 }, + .pipe_phy_status = { 0x0034, 6, 6, 0x01, 0x00 }, + .con0_for_pcie = { 0x0000, 15, 0, 0x00, 0x1000 }, + .con1_for_pcie = { 0x0004, 15, 0, 0x00, 0x0000 }, + .con2_for_pcie = { 0x0008, 15, 0, 0x00, 0x0101 }, + .con3_for_pcie = { 0x000c, 15, 0, 0x00, 0x0200 }, +}; + +static const struct rockchip_combphy_cfg rk3562_combphy_cfgs = { + .num_phys = 2, + .phy_ids = { + 0xff750000 + }, + .grfcfg = &rk3562_combphy_grfcfgs, + .combphy_cfg = rk3562_combphy_cfg, +}; + + static int rk3568_combphy_cfg(struct rockchip_combphy_priv *priv) { const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; @@ -1055,6 +1212,10 @@ static const struct rockchip_combphy_cfg rk3588_combphy_cfgs = { }; static const struct of_device_id rockchip_combphy_of_match[] = { + { + .compatible = "rockchip,rk3562-naneng-combphy", + .data = &rk3562_combphy_cfgs, + }, { .compatible = "rockchip,rk3568-naneng-combphy", .data = &rk3568_combphy_cfgs, -- 2.43.0
