On Tue, 10 Feb 2026 12:52:21 +0000, Renaud Barbier wrote:
> This patch adds limited support for the Ethernet controller on the NXP
> LS1021A:
> * Only one port has been tested i.e enet1.
> * The PHY negotiation has been limited to 100Mbits-FD.
>
> In this version 3, remove code that was meant to make the difference
> between the mdio register offset between PPC and ARM if retrieved from
> the device tree. However, the PPC platform does not support DTBs and the
> mdio offset is already taken into account into the mdio access functions.
> Hence, the clean up.
>
> [...]
Applied, thanks!
[1/4] net: gianfar: disable link information
https://git.pengutronix.de/cgit/barebox/commit/?id=f532dc064126 (link may
not be stable)
[2/4] gianfar: apply checkpatch recommendations
https://git.pengutronix.de/cgit/barebox/commit/?id=9af9cb22a97f (link may
not be stable)
[3/4] net:gianfar: add device tree support
https://git.pengutronix.de/cgit/barebox/commit/?id=49b79bb5e566 (link may
not be stable)
[4/4] ARM: ls1021a: initial Ethernet and mdio configuration
https://git.pengutronix.de/cgit/barebox/commit/?id=7d789e0de5a1 (link may
not be stable)
Best regards,
--
Sascha Hauer <[email protected]>
